I have a 2001 ranger edge, with the 3 in BL on it. I wanna get possibly 2 inches for right now to add onto the suspension. Whats the easiest way to do this without a "kit" Thanks!

 

Crank your t-bars(if you have em and haven't done this already) and slap an aal in the back.

 

Ok i will have to try that any specific tool to crank the t-bar? whats an aal? sorry i'm a lil new to this stuff. Thanks

 

Add-A-Leaf (aal)......it goes into your leaf spring pack and gives about 2" of lift.......

socket is what is needed to crank on the torsion bars...

i doubt you will be able to get 2" of lift out of the torsion bars.......

get a spindle lift for the front....it will give you 3" of lift...

 

spindle lift where can i find one of those any specific web site?

 

its 4x4 also by the way

 

ahhh well a spindle lift wont work......the smallest suspension lift for your truck is a 4" Superlift kit......

search www.summitracing.com or www.rockymountainsusp.com for lift prices...

 

damn thanks anyways guys

 

you can still crank your torsion bars and get an add a leaf or chevy shackle . do a search but with a 4wd it may not be a good idea to crank it more then 1 inch but many people do it without problems . use the search engine . 50 - 150 dollars max for 1 or 2 inches.