I have a 4 inch suspension lift in my 94 ranger. The back is lifted with blocks and I don't like the axle wrap it is giving me. How would yall lift the rear without using blocks? I was thinking of using explorer leaf packs(if they would fit) and getting a little bit of lift that way. what do yall think I should do? any input will be greatly appreciated! THANKS!

 

so is it 4 inch blocks??? if so then youll need a longer shackles for the explorer leaves because explorer leaves are about 2 inches taller...

 

well it is the stock block and a 3 inch rough country block stacked on that. What I'm tryin to do is get rid of the 3 inch rough country blocks and find some other way to lift it so I have less axle wrap by using an explorer leaf pack which has more arch because the explorers are SUA and rangers are SOA.

I know that doing a SOA swap on an explorer is about 5 inches of lift so I wouldn't see why they wouldn't give me atleast 3 inches of lift on a ranger.

 

can anyone clear up my confusion?

 

the spring hangers on explorers are under the frame rails and rangers are on the sides so the springs will give about 2 or so inches of lift. use expo leafs and belltech 6400 shackles and you should be able to remove the 3" block.

 

alright, thats what i will do. lol

Will this affect my pinion angle?

THANKS!!