How do we get the Front diff out
#1
#2
zacbeard told me how a while ago, dont know what thread anymore.
your picture looks like you cant get the BJ out, run down to the local parts store and rent/barrow the ball joint seperator
you have to take the upper ball joint apart/out
brake caliper off
then the rotor
pop the passenger side CV shaft out, i used one of those ball joint forks
then there are 3 bolts that you have to take out..
your picture looks like you cant get the BJ out, run down to the local parts store and rent/barrow the ball joint seperator
you have to take the upper ball joint apart/out
brake caliper off
then the rotor
pop the passenger side CV shaft out, i used one of those ball joint forks
then there are 3 bolts that you have to take out..
#8
#9
#10
shame. all parts on the front end can usualy be detached by hitting the maing part its attached to. for eample, hit the area of the spindle where the ball joint is a few times, and it will pop out, same for the tie-rod on the front of the spindle and such. a fork is rarely needed. they usually cause more damage then its worth.
#11
#12
Thread
Thread Starter
Forum
Replies
Last Post
Clinton
Snapshots
15
07-06-2011 03:11 PM
schoolbus
Drivetrain Tech
14
01-30-2009 10:06 AM