Suspension Tech General discussion of suspension for the Ford Ranger.

Suspension lift help...

Old Jun 18, 2010
  #1  
Little Bear's Avatar
Thread Starter
|
Member
Joined: May 2010
Posts: 29
Likes: 0
From: Charleston, SC
Suspension lift help...

I know suspension lifts are sold engine and drivetrain specific, and I have a 2.5L 2wd Ranger. Now, since I can't find one for my engine theoretically could I order a 3.0 lift and put it on? Would the front shocks just be really stiff because its not for my truck. I've found quite a few 2wd lifts. Like from Fabtech and what not...
Would this work or is this just the most retarded question ever?
 
Reply
Old Jun 18, 2010
  #2  
99fordranger's Avatar
Member
Joined: Oct 2009
Posts: 60
Likes: 0
From: G town, Montana
To my knowladge with rangers non of the kits are really engine or drivetrain specific. There are two different kinds of two wheel drive front suspensions, the coil ones and the ones with torsen bars. Check this out though theres some different lift kits here.
2WD Ford Ranger Suspension Kits
 
Reply
Old Jun 18, 2010
  #3  
FULLSCALE's Avatar
Level III Supporter
iTrader: (12)
Joined: Mar 2009
Posts: 8,184
Likes: 4
From: Clinton, Ontario
Like said above engine doesn't matter, just suspension type.
 
Reply
Old Jun 18, 2010
  #4  
demiseranger's Avatar
Member
iTrader: (2)
Joined: May 2008
Posts: 331
Likes: 0
From: Tucson , Arizona
Engine does matter... Why? Because the spring rates are different on the coils. So to keep the same ride height a heavier engine will have a stiffer coil than a lighter engine would. Basically all im sayin is that your ride may suffer a bit more but it might have a bit more lift.

But...on a SLA truck, more lift isn't necessarily better because downtravel will decrease. The upper arms will max out quicker.

This is based on experience, but don't let this stray you away. If you find a good deal, jump on it.
 
Reply
Old Jun 18, 2010
  #5  
99fordranger's Avatar
Member
Joined: Oct 2009
Posts: 60
Likes: 0
From: G town, Montana
^ Good point the kits should all bolt up the same as long as its for the right type of suspension. But Coils for your weight are a good idea, but I dont think heavier coils would be bad.
 
Reply
Old Jun 18, 2010
  #6  
Little Bear's Avatar
Thread Starter
|
Member
Joined: May 2010
Posts: 29
Likes: 0
From: Charleston, SC
99fordranger: That is the site where I figured out there are 2wd ones out. I'm registered with the same name over there.lol. I'm coil sprung. I kinda figured what you said, but I had to ask to be sure.

demiseranger: Yeah, I understand the spring rates are different..but like I asked, would the springs just be stiffer. Which you went on to answer what I wanted answered. Ride quality is only but so important in just a winter driver. I've got a motorcyle that I drive pretty much from the first hott day of the year till it starts getting cold. This is just to make my winter ride look sweet. Mall-crawler for sure.lol.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
safaripacific
OLD - Suspension, Tires, & Wheels
17
Sep 10, 2012 07:08 PM
SteveOh
1" & 3" Body Lifts
11
Sep 13, 2006 05:21 AM
garciaedgar
1" & 3" Body Lifts
36
Sep 4, 2006 10:33 PM
Sparki
1" & 3" Body Lifts
35
Aug 8, 2005 08:59 PM
yellerEDGEchick
Suspension Tech
23
Jul 6, 2004 01:42 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 04:42 AM.