I went to crank the t-bars today and i cranked the drivers side first and i topped out and woudnt go any further. But the truck didn't even raise 2". And on the passenger side i cranked until they were even but it still could have went in alot. Is tis normal or is something wrong.

 

I don't know if its normal but mine is the same way.. I was wanting to go slightly higher but one of my bolts is topped out.

 

the passenger bolt is much longer than the driver side, so it will stick out farther and still be level. why, i dont know

 

on what jannettes truck?

 

Yes that is normal. the drivers side of the truck is heavier therefore the bolt has to go in farther for the same results. To my knowledge 99% of Ranger Edge's are this way.

 

no actually, the passenger bolt IS LONGER than the drivers bolt, about an inch to be exact.

 

oh yeah well my passenger side bolt rusted out bla bla bla... lol just joking around had to do it..."i gota headache"


well as long as they are even there should be a problem...

 

o dear you dont even have t-bars



i still dont understand why we cant just get the longer bolt with the locktite on it and put it in the other side....

 

zach i thought about doing that for a while, but you can really only crank so much before you get issues with the upper control arm.