wanna level the rear but cant find any kits
are they out there , or will i have to mod ?

 

If the front is sitting higher and you want the rear to be the same you can either do add a leaf, add blocks or shackles.

 

.....and if the rear is sitting higher then the front (like an stocker usually does), then crank the T-bars and be done with it.

 

i dont have T bars

 

no i want the front to match the back

 

Normally the front is lower than the back? So your wanting to lower the back?

 

yes to match the front

 

planing on a 2/3 drop
or would te drop it self level it out

 

shackle flip in the rear

 

it wont be too much of a drop ?

 

you could take out the blocks in the rear ( if you have any )

 

shackle flip or just do a coil spacer to level the front

 

noob here a block????

 

he's talking about the block the leaf spring are on

 

oooooooooooo

 

and if it dosent have blocks, im pretty sure you can put the leaf springs under the axle

 

cool , im trying to get the back low and the front high lol

 

hmm lower the back?? use an Explorer axle, they are spring under axle, will drop it 5 inches with stock springs, and it should be a bolt in swap, even use the same brakes, go look at an EXplorer in the junkyard and measure it all up,

 

now if i just got a 2/3 drop kit will it all level out with just the kit
?

 

I believe so. It should be -2in front, and -3in rear making it level. ...i think

BTW I love those STX Rangers, I would add just add the Roush side skirts and a roll pan.