Truck measurments, add yours. - Ranger-Forums - The Ultimate Ford Ranger Resource


Suspension Tech General discussion of suspension for the Ford Ranger.

Reply
 
LinkBack Thread Tools Search this Thread
  #1  
Old 06-04-2007
Member
Thread Starter
 
Join Date: Aug 2006
Location: Pensacola, FL
Posts: 647
Truck measurments, add yours.

This is just for everybody who wants to know how high or slammed other peoples trucks are. You all know the camera can be deceptive and no one knows how high things are because everyone takes pics from different heights. So, I'm curious to see just how BIG or LOW you guys' trucks are.

2005 Ranger Edge
Name:  dia.jpg
Views: 55
Size:  110.3 KB
Tire height: 33"
I Bottom of grill surround: 38 1/4"
H Top of front fender opening: 44"
G Bottom of rocker panel: 27 1/2"
F Window sill: 57"
E Top of roof: 79"
D Top of rear fender opening: 45 1/2"
C Top of bed: 57"
B Bottom of rear bumper: 30"
A Top of tailgate when down: 40 1/2"

ALL of my lift components are in my signature, post what you have.
Also, feel free to add any other truck measurements you feel are important.

Last edited by Oh5Edge; 06-04-2007 at 03:01 PM.
Reply With Quote
  #2  
Old 06-04-2007
ScottG's Avatar
Member
 
Join Date: May 2004
Location: Lewiston, Maine
Posts: 4,926
make this easier, use paint

take a pic of a ranger, draw where you want messured and label A, B, C etc


and maybe have them post their vehicle spec (sort version) and lift/lower kit

ScottG
Reply With Quote
  #3  
Old 06-04-2007
Member
Thread Starter
 
Join Date: Aug 2006
Location: Pensacola, FL
Posts: 647
Word, I was thinking about doing the diagram but I didn't have that much time. I'll have to do this later tonight. I'm fixin' to go into work.

EDIT: Nevermind, I got it.

Last edited by Oh5Edge; 06-04-2007 at 02:58 PM.
Reply With Quote
  #4  
Old 06-04-2007
camodown's Avatar
Lost in Nowhere
iTrader: (3)
 
Join Date: Feb 2007
Location: Midland, TX
Posts: 5,029
I think you should add actual ground clearence at the axels. IMO
Reply With Quote
  #5  
Old 06-04-2007
Member
Thread Starter
 
Join Date: Aug 2006
Location: Pensacola, FL
Posts: 647
Quote:
Originally Posted by camodown
I think you should add actual ground clearence at the axels. IMO
I'll add that when I get back from work.
Reply With Quote
  #6  
Old 06-04-2007
gumby's Avatar
Member
iTrader: (1)
 
Join Date: Nov 2005
Location: indy
Posts: 1,581
might change the rocker measurement(G) to bottom of door. very common and easy to roll the rockers under on these trucks offroad. will throw off the measurements...

off the top of my head

33" tire
H: 40.5"
G(bottom of door): 26.5"
D: 41"

lift specs in my profile
Reply With Quote
  #7  
Old 06-04-2007
99ranger4x4's Avatar
RF Veteran
iTrader: (3)
 
Join Date: Jun 2006
Location: Austin, TX
Posts: 12,198
jumpin in to find it later, ill post up my specs before and after the RCD kit
Reply With Quote
  #8  
Old 06-04-2007
lifted97ranger's Avatar
Member
 
Join Date: Nov 2005
Location: Charlestown, IN
Posts: 1
Tire height: 35"
I Bottom of grill surround: 41"
H Top of front fender opening: 45.5"
G Bottom of rocker panel: 29"
F Window sill: 58"
E Top of roof: 80.75"
D Top of rear fender opening: 47"
C Top of bed: 58"
B Bottom of rear bumper: 30.5"
Reply With Quote
  #9  
Old 06-08-2007
Member
Thread Starter
 
Join Date: Aug 2006
Location: Pensacola, FL
Posts: 647
Maurice, I didn't figure you'd have me beat by 2", your truck must be huge.

BUMP, I'm interested in seeing Zabeard's and Edge_wannabe's and Dub's bagged truck. I'm sure others are interested in seeing other trucks.
Reply With Quote
  #10  
Old 06-08-2007
lifted97ranger's Avatar
Member
 
Join Date: Nov 2005
Location: Charlestown, IN
Posts: 1
Quote:
Originally Posted by Oh5Edge
Maurice, I didn't figure you'd have me beat by 2", your truck must be huge.

BUMP, I'm interested in seeing Zabeard's and Edge_wannabe's and Dub's bagged truck. I'm sure others are interested in seeing other trucks.
you have to remember that i have a larger tire size than you also.......

i am about 1.5" to 2" smaller than zabeards truck....well for now atleast...i am getting ready to install 8" lifted coils in place of my 5.5" lifted coils than i should be another 2" taller!
Reply With Quote
  #11  
Old 06-08-2007
Member
 
Join Date: Oct 2005
Location: Havre De Grace,Md
Posts: 3,262
Quote:
Originally Posted by lifted97ranger
you have to remember that i have a larger tire size than you also.......

i am about 1.5" to 2" smaller than zabeards truck....well for now atleast...i am getting ready to install 8" lifted coils in place of my 5.5" lifted coils than i should be another 2" taller!

where you getting the 8" springs from, what are you doing with your old ones?
Reply With Quote
  #12  
Old 06-08-2007
Member
Thread Starter
 
Join Date: Aug 2006
Location: Pensacola, FL
Posts: 647
.
Reply With Quote
  #13  
Old 06-08-2007
Member
Thread Starter
 
Join Date: Aug 2006
Location: Pensacola, FL
Posts: 647
I know you got bigger tires, or I got tires that are too small I got some 36.5" procomps I'm throwing on when I get some adapters. Are you going to be sitting bulldog with those coils or you got something different for the rear?
Reply With Quote
  #14  
Old 06-08-2007
zabeard's Avatar
who?
iTrader: (8)
 
Join Date: Nov 2004
Location: IN
Posts: 26,045
Quote:
Originally Posted by lifted97ranger
you have to remember that i have a larger tire size than you also.......

i am about 1.5" to 2" smaller than zabeards truck....well for now atleast...i am getting ready to install 8" lifted coils in place of my 5.5" lifted coils than i should be another 2" taller!

yet little do you know I raised mine more the other weekend...
Reply With Quote
  #15  
Old 06-08-2007
zabeard's Avatar
who?
iTrader: (8)
 
Join Date: Nov 2004
Location: IN
Posts: 26,045
Quote:
Originally Posted by Oh5Edge
BUMP, I'm interested in seeing Zabeard's and Edge_wannabe's and Dub's bagged truck. I'm sure others are interested in seeing other trucks.

maybe if i remember I'll post some later tonight.
Reply With Quote
  #16  
Old 06-08-2007
lifted97ranger's Avatar
Member
 
Join Date: Nov 2005
Location: Charlestown, IN
Posts: 1
Quote:
Originally Posted by fletch12518
where you getting the 8" springs from, what are you doing with your old ones?
i got 8" Skyjacker springs from a guy on RPS who is doing a SAS........

if you want my old coils when i get them out i think we could work something out!

Quote:
Originally Posted by Oh5Edge
Are you going to be sitting bulldog with those coils or you got something different for the rear?
na i think i am either going to install the stock block back in or get some Belltech 6400 drop shackles....

Quote:
Originally Posted by zabeard
yet little do you know I raised mine more the other weekend...
nice! have you done anything with the rear yet? and are you still taking the BL off?
Reply With Quote
  #17  
Old 06-08-2007
l2en's Avatar
Member
 
Join Date: Dec 2005
Location: The Keystone State
Posts: 4,521
*Just poking fun* =]


What's the measurement from the ground to the torsion bars Jake?
Reply With Quote
  #18  
Old 06-08-2007
zabeard's Avatar
who?
iTrader: (8)
 
Join Date: Nov 2004
Location: IN
Posts: 26,045
Quote:
Originally Posted by lifted97ranger
nice! have you done anything with the rear yet? and are you still taking the BL off?
I lifted it a few inches too. Sits real nice now. But that will all change with the D44.

BTW I cant take the BL off unless I really re-engineer everything.
Reply With Quote
  #19  
Old 06-08-2007
Trigger01's Avatar
RF Veteran
iTrader: (2)
 
Join Date: Oct 2005
Location: Knoxville, TN
Posts: 18,788
Quote:
Originally Posted by zabeard
I lifted it a few inches too. Sits real nice now. But that will all change with the D44.

BTW I cant take the BL off unless I really re-engineer everything.
That's good news for those of us that like you BL on there.
Reply With Quote
  #20  
Old 06-08-2007
swamper06's Avatar
Member
 
Join Date: May 2007
Location: McAdoo, PA
Posts: 735
I forget what site i saw it on but people were measuring height by stacking cans of soda, beer, etc. I thought it was pretty cool.
Reply With Quote
  #21  
Old 06-08-2007
lifted97ranger's Avatar
Member
 
Join Date: Nov 2005
Location: Charlestown, IN
Posts: 1
Quote:
Originally Posted by swamper06
I forget what site i saw it on but people were measuring height by stacking cans of soda, beer, etc. I thought it was pretty cool.
RPS....
Reply With Quote
  #22  
Old 06-09-2007
Member
Thread Starter
 
Join Date: Aug 2006
Location: Pensacola, FL
Posts: 647
Quote:
Originally Posted by l2en
*Just poking fun* =]


What's the measurement from the ground to the torsion bars Jake?
Ha ha, well it's enough to get my street queen over speed bumps and curbs You people and your coils......HA.
Reply With Quote
  #23  
Old 06-09-2007
jrpro130's Avatar
RF Veteran
iTrader: (1)
 
Join Date: Sep 2005
Location: Florida
Posts: 5,057
Quote:
Originally Posted by Oh5Edge
Ha ha, well it's enough to get my street queen over speed bumps and curbs You people and your coils......HA.
haha, only reason why my truck is a street queen at the moment is b/c it's my DD, I ened it for work/my atv, and I can't afford to fix another tranny or whatever else goes wrong.

If I get a DD...well...it won't be blue anymore.

aren't you getting 36/7's? I'm probably going to just get 35s, I'm lowering the truck a little (putting the 2" block back in instead of the 3" slanted block (pinion is +4 degrees right now). I want to have the 3" regular block...we'll see.
Reply With Quote
  #24  
Old 06-10-2007
Member
Thread Starter
 
Join Date: Aug 2006
Location: Pensacola, FL
Posts: 647
I got a set of 36.5 procomp X-terrains that I just need some wheel adapters for. Those are only going on if gas continues to come down. If it goes back up I'm dropping it down by uncranking the torsion bars and taking the blocks and shackles out, down to an inch above stock height and putting 28's on. But all-in-all I'll end up with 35's as DD tires, 37's as show tires, and 28's as FUEL ECONOMY tires and some 4.88's gears for the rear.
Reply With Quote
  #25  
Old 06-10-2007
jrpro130's Avatar
RF Veteran
iTrader: (1)
 
Join Date: Sep 2005
Location: Florida
Posts: 5,057
Quote:
Originally Posted by Oh5Edge
I got a set of 36.5 procomp X-terrains that I just need some wheel adapters for. Those are only going on if gas continues to come down. If it goes back up I'm dropping it down by uncranking the torsion bars and taking the blocks and shackles out, down to an inch above stock height and putting 28's on. But all-in-all I'll end up with 35's as DD tires, 37's as show tires, and 28's as FUEL ECONOMY tires and some 4.88's gears for the rear.
I like those new xtreme mud terrains, decent price from 4wp and their 35 runs a little big...
Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Truck Measurments Please tx03edge Suspension Tech 1 02-19-2009 05:48 AM
Coil Spring Measurments carolinasled Suspension Tech 0 07-05-2008 10:39 PM
Need Measurments for grill gaurd mounts malydeen Exterior Semi-Tech 2 01-29-2008 01:02 AM
Is the new 2.3l exhaust bolts the same pattern and measurments as the old 2.3l? mtrain 2.3L & 2.5L I4 Tech 3 01-03-2008 09:36 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 03:01 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.