will 31 meats fit on my stock rim
and will 31 clear with out rubbing with no lift at all . ive looked at the tire chart but nothing on the STX models
hope i haven't asked this before i cant remember ... anesthesia is a he!! of a drug

 

what rims do you have? ha.

 

haha idk ,thats part of the problem

 

they should be 7 or 7.5" for width. what size are the tires.. and don't say 31's LOL.

 

31 x 10.50 R15

 

you'll be fine. your rims are 15x7, so 31x10.5 wont be a problem.

 

will they rub?

 

Nope they wont rub, you could even get away with 32's on your truck.

 

fill me in on the frame of the stx, torsion bars? are you 4wd or 2wd?

 

thats what I was thinking. my 2wd is clearing 31's no problem or rub.

 

2wd

 

you're good bro.

 

may do 32 when i do lift

 

sweet . its getting close to new tires

 

I hear ya. my tires are pretty much shot what tires you planning on getting?

 

dont know if there any good ?
http://www.summitracing.com/parts/BFG-89796/?rtype=10

 

haven't heard anything bad about them. seen them around a lot too. I looked into them a while back, and they seemed perfect for me since I don't do any hardcore offroading in my 2wd lol.
their also cheaper here V
http://www.tirerack.com/tires/tires....ORWL&tab=Sizes

 

im looking for coil spacers too just to get the front off the ground a bit, just dont know where to find some
and i do some off roading just know what not to get in to and damn sure no mud holes you brake to much stuff , and i dont feel like doing the long clean up after

 

heckyeah tire rack is the best

 

shipping from tirerack is 100$, and their out of midway georgia. you might be able to go pick them up if you got them from there. check ebay for coil spacers, pep boys, autozone, and I guess just google it. daystars are nice, but pricey. yeah, I offroad a bit, but not intense stuff. I pretty much know my trucks limits by now lol.

 

yeah tiretrack is right by summit im like 2hours form there

 

it'd be worth picking them up. I wish I lived like an hour or hour and a half closer to atlanta, that way all you georgia people weren't so far.

 

No lift at all? Coil sprung?

I put my 31's on my truck before body lifting to see how they would look. There was a like a inch between the tire and the inner fender, IMHO not enough i put my stockers back on and waited to put the BL on didnt want a crunched fender.Could be my funky mazda fenders or the 15x8 wheels.If they will fit stock i defently would not wheel them.

 

yes no fit , well just coilspacers
https://www.ranger-forums.com/showth...ht=31+10.50R15
saw this 5mins ago they didnt have any isssues

 

think since im going to do coilspacers i think it will be ok for some light wheeling ?????