33x12.50. will rub if not maxed bars...even at that...still rub valence w/o triming and rub inner fender.

 

I have 16 inch tires.

 

I can safely say my tires do not rub on the valence.

 

Wheel width and Backspacing are important not all wheels are the same the chart is general..

 

Ok so from experience 33x12.5 should fit comfortably on a newer model 4x4 with cranked tbars belltech 6400 shackles and AAL's. I also replaced the stock shocks with superlifts

 

BUMP FOR THE PEOPLE THAT CANT FIND STICKY THREADS.....

 

ive got a 94 with 14s. what size would fit?

 

i had 31" all terrains on my ranger with no lift and no rubbing and no trimming. oh and thats on a 4x4. here's the best pic i could find, i have a closer one but a fence is in the way.


http://s978.photobucket.com/albums/a...ndchevy013.jpg

 

OK, I'll ask ONCE, then leave you guys alone....

What is the largest size that will fit on the stock 15" 5 spoke wheels that come on a 2010 XLT?

When I switch to BFG's, I'd like to know. ( since the stock Michelins apparently suck :( )

NO T-bar adjustment, NO modifications.

Thanks,

~Joe

 

best for not doing anything and I saw 4x4 in your profile so assuming that. 31x10.5x15

 

with NO rub?

~Joe

 

no it came stock on level II trucks

 

Thanks!

I think the BFG All Terrain T/A's in that size would look pretty good.

~joe

 

Well I've gotten a couple emails over the last few weeks asking about certain tire size configurations, and came back to update my original post to say that I have no first hand experience fitting larger tires on Rangers. I only made this thread with Stone's help solely to make things easier for peeps, but now since I can't edit anything no one will see this post prior to emailing/PMing me anyways, but whatever.

Just in case people do read this far into the thread, please don't ask me specific questions about your set-up, I have no answer. I recommend either consulting the chart, or searching through the 7 pages of posts to see who is running a similar set-up, and ask them.

 

they switched to michellins in 2010? i've got goodyear rt/s and they suck in the rain.

i was looking at a tire chart in an ad in four wheeler and i think when i get new tires/pre-keys and shackels, i'm going with either a 265-70 R16 or a 265-75 R16. i know that's not much bigger then i have right now (255-70 R16) but i don't wanna go big yet and i like my stock rims.

this a good size? would either of those two fit with just keys and shackels?

 

Yup. Your truck will essentially now be like every other pre 08 truck. I have ran them for 2 years not with no problems what so ever

 

great. glad to hear. i went back through every page and read. even saw that chart halfway down on page one.

david, the tire chart (tyre1.com or whatever) you posted is not coming up and i would like to see the mph and gearng and whatnot. do you have another site? i bookmarked the other one (gordon glasgow) but it's just giving me the tire size from 265-75 R16 to the 31.65x10.43 number.

chainfire, you got pics of that setup at all? i wanna see what my clearance would look like.

 

I'll take any chance I can to be a *****

These are 265/75-16

 

looks good but any on flat land?

 

only ones I could find.
Damn these pics are old lol

 

cool thanks. i remember seeing that pinstrip on those trucks back then. there is a 2wd reg cab one i see parked at the mall alot. they came in other colours too right? like green and blue.

 

yea. That was one of the first things to come off my truck lol

 

I noticed that it wasn't working while I was searching for the 'edit' button. I have no other links for that site, sorry.

 

Hmmm okay i can Verify that on an 2008 XL You can fit 30x9.5 15 to fit with no mod.

Would love to post pics but i need to get batteries for my camera.

 

i have a 89 wit 2 in suspension and 3 inch body with 16in AR rims not sure of the width just want to no what size tire i can with out rubber i was thinkin 32x10.5 or 11.5 let me no what ya think