ive got a stock suspension 2001 ranger xlt 4x4 and i was wondering what is the biggest tire i could put under there without rubbing? Also does anybody know if tire places will mess with torsion bars?

 

32in-33in with some fender trimming .. there's millions on threads like this.... what do u mean "mess with torsion bars"?

 

will they raise'em

 

I also don't wanna have to trim the fenders

 

ok, if you dont want to trim the fenders, or touch the torsion bars then why not get a simple 3 inch body lift and clear 33x12.50's?

 

32s will fit with just a slight t-bar crank and will not rub and will give enough travel offroad to not worry. The tire place can crank your torsion bars if you tell them to(unless their dicks or retards), but its an easy thing to do at home even before going into the tire place

 

I put 265/75 R16's (31.5") they hit if I turn all the way and hit a bump, otherwise, no problems.

 

i've got a 2001 4x4 stock suspension, i just raised my t-bars about 2 inches, the 265's clear nicely without any rubbing.
as for wether tire places will raise your t-bars, just ask.

 

torch

yet another useless thread, there is a sticky in one of the sub forums, and there are threads like this everyday, not to be an *** or anything


just make sure you don't dislodge the flux capacitor

 

265/75-16's with no issues or modifications

 

Just put 35s on it and rub a little. :o)

 

X2....Its only plastic, itll melt