dumb question but i just bought a 2010 fx4 i leveled it with keys then added 2" blocks in the rear and cranked the torsion bars to match the rear can i fit 285 75 R16 on the stock rims they are 7" rims

 

By keys you mean prekey mod or eBay lift kit keys? If prekey I do believe those tires should fit with the right offset on the rims. Not 100% on that though

 

yes

 

Thanks im going to get the mud countrys(dick cepeks) 285 75 R16 any feed back on them would be great

 

I'm wondering about those too. I am looking at a few different tires

 

is it true that 265 75 R16 is the same as 32 10.5 R16 and 285 75 R16 is the same as 33 11.5 R16?

 

^^ yes

 

they seem to be the best tire for the price good clean out and dry traction

 

I owned them good tire till about 35% ish left then there crap but other then that I love them I got close to 30k and was about 35% left and sold them on Craigslist

 

30k hard or just the odd time offroad

 

what tire do you like the most

 

 

30K mixed City, Highway(ALOT), Dunes, little bit on trails up at my wifes parents place up north

I would prob buy them again and treat them a little better and not drive 1600 on a bad tie rod to TN and back lol...

 

once tires are on im gona post pics

 

what size lift on your truck? 4"

 

I like my Toyo's so far better now but they are a lot more expansive tire to begin with

 

3" body lift on those picture with the Mud country's and 15x8 wheels





here is 3" body lift and T-bar almost maxed and Rear shackles. and my new toyo's and 15x10

 

i use my mud countries off road almost every weekend and i use them really hard. when i had my 33s i put about 10000km on them and barely got them down to the first wear area. they are a really long lasting tire if you keep them properly inflated for on road, i drove for about a month @ 15 psi on road and that was what wore them more than anything. i recommend them

 

thats alot of rubber looks good im thinking about gettin a body lift did you do the install your self?

 

well the toyo's are 33x13.50x15 lol...

yes I and another member installed the lift. Done over 12+ body lifts there not that bad

 

the box part would be easy but i dont know about the cab i dont have a lift so it would be with a jack