2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

Warm engine no start - tfi already relocated

Thread Tools
 
Search this Thread
 
  #1  
Old 06-03-2013
Danny7's Avatar
Member
Thread Starter
Join Date: Jun 2013
Location: Brookfield, wisconsin
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Warm engine no start - tfi already relocated

I had a bad problem with my truck stalling when it got warm. I relocated the tfi to the front of the truck on the driver side. Right where there is an opening to get plenty of airflow. My truck hasn't died on me since but it does not start when it is warm. Starts fine when it cools down. I thought remounting the tfi would fix this but I guess it hasn't. When it is warm/hot it does crank but fails to start. There is good fuel pressure. The other day when it wouldn't start I hooked a good spark plug on the wire coming from the coil. Cranked over and there is no spark. I felt the tfi and it was not warm. What can the culprit be? My guess is a bad coil. Previous owner said he replaced the coil though. What else can be wrong?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wilbur
2.9L & 3.0L V6 Tech
0
10-03-2012 09:37 PM
pbilt
SOHC - 2.3L & 2.5L Lima Engines
1
07-09-2011 05:54 AM
cash
General Technical & Electrical
0
10-06-2010 08:30 PM
Rangecat
General Technical & Electrical
7
06-23-2008 11:42 AM
Rolfamily
General Ford Ranger Discussion
4
10-28-2006 11:40 AM



Quick Reply: Warm engine no start - tfi already relocated



All times are GMT -6. The time now is 07:50 PM.