i need header install help! very frustrated! lol
#1
i need header install help! very frustrated! lol
so i have been working on installing my headers, got the passenger side all done and wrapped up.
now I am stuck on the drivers side. the silly Engine Oil Dip Stick will not come out, it appears to go into the block behind the engine mount. I cannot see how it is attached and it wont come out. I have wiggled the crap out of the thing bent it and who knows what else the dang thing just wont come out.
HELP! lol
now I am stuck on the drivers side. the silly Engine Oil Dip Stick will not come out, it appears to go into the block behind the engine mount. I cannot see how it is attached and it wont come out. I have wiggled the crap out of the thing bent it and who knows what else the dang thing just wont come out.
HELP! lol
#5
I am pretty sure you can slip it over the dipstick tube. If you pull the dipstick out first it will make things much easier. The dipstick tube is, or should be, a pressed fit into the block with one small bolt holding it to the head. If you bend it too much and crease the tube, it can split causing an oil leak and make it impossible to get the stick out. If you do break it, i have a couple of them ready to ship!!! BTW, I am almost finished with the engine for the stang and hung the rear bumper and stuff tonight!!! Pics will be on the website!
#11
Originally Posted by 5speedin2.3
wow, that motor is sexy.
i want to see more of it.
i want to see more of it.
#12
Originally Posted by NicksterSVT
www.pdpracing.com there should be enough pix on there for your entertainment pleasure...
is JBA the only header company that makes them for the 4.0
ive looked but no luck..
#13
gibson makes some.
Wayne yes lots of blood was involved. lol
Got them on and everyhting is good.
It did slide over like mentioned. But I had bent the dip stick tube up so bad it would not fit anyway. So i had to get it out. I clamped it with some vice grips and used a pry bar.
Evan click the Gallery link on Nicks site.
Wayne yes lots of blood was involved. lol
Got them on and everyhting is good.
It did slide over like mentioned. But I had bent the dip stick tube up so bad it would not fit anyway. So i had to get it out. I clamped it with some vice grips and used a pry bar.
Evan click the Gallery link on Nicks site.
#16
Originally Posted by zabeard
gibson makes some.
Wayne yes lots of blood was involved. lol
Got them on and everyhting is good.
It did slide over like mentioned. But I had bent the dip stick tube up so bad it would not fit anyway. So i had to get it out. I clamped it with some vice grips and used a pry bar.
Evan click the Gallery link on Nicks site.
Wayne yes lots of blood was involved. lol
Got them on and everyhting is good.
It did slide over like mentioned. But I had bent the dip stick tube up so bad it would not fit anyway. So i had to get it out. I clamped it with some vice grips and used a pry bar.
Evan click the Gallery link on Nicks site.
Glad to see you got them on. Hope you enjoy them!!!
Thread
Thread Starter
Forum
Replies
Last Post
FixOrRepairDaily
SOHC - 2.3L & 2.5L Lima Engines
2
11-28-2010 08:47 PM
2001fordranger
General Ford Ranger Discussion
12
08-05-2010 12:38 PM
kenscivic
2.3L & 2.5L I4 Tech
2
08-09-2007 10:19 PM