DOHC - 2.3L Duratec / Mazda L Engines Discussions and Topics specific to the Duratec 4 cylinder engines

What purpose does this serve?

Thread Tools
 
Search this Thread
 
  #1  
Old 04-09-2010
gibsondale's Avatar
Member
Thread Starter
Join Date: Mar 2010
Location: Culpeper VA
Posts: 351
Likes: 0
Received 0 Likes on 0 Posts
What purpose does this serve?

excuse the picture quality, but is this some type of resonator? what's the difference with or without it? what happens if i take it off and fill the hole?
 
Attached Thumbnails What purpose does this serve?-0409001925.jpg  
  #2  
Old 04-09-2010
silverfox's Avatar
Member
Join Date: Jul 2008
Location: Taft, Ca
Posts: 1,040
Likes: 0
Received 1 Like on 1 Post
i have no clue what they are for but i do know my 08 dosnt have it or the one behind it the nipple like parts are there on the airtube but they were never cut out on the inside from the factory if you wanted to get rid of them you could get a intake tube from a 08 or since yours is a 03 get a cold air intake i cant get a cold air intake because they swapped maf styles in 04 and no one has came out with a kit for the new ones
 
  #3  
Old 04-09-2010
FULLSCALE's Avatar
Level III Supporter
iTrader: (12)
Join Date: Mar 2009
Location: Clinton, Ontario
Posts: 8,184
Likes: 0
Received 4 Likes on 3 Posts
I think it has something to do with controlling the noise of the air entering the engine..
 
  #4  
Old 04-09-2010
gibsondale's Avatar
Member
Thread Starter
Join Date: Mar 2010
Location: Culpeper VA
Posts: 351
Likes: 0
Received 0 Likes on 0 Posts
yeah it cant possibly have anything to do wit anything but noise, no holes, no wires connected t it.

the thing behind is that exhaust gas recirculation thingy right?

i think i'm gonna take it off and see what happens
 
  #5  
Old 04-09-2010
silverfox's Avatar
Member
Join Date: Jul 2008
Location: Taft, Ca
Posts: 1,040
Likes: 0
Received 1 Like on 1 Post
plug up the holes before you run it or you will pop a check engin light on
 
  #6  
Old 04-09-2010
elementsenjoi's Avatar
Member
iTrader: (2)
Join Date: Aug 2007
Location: 352 Florida
Posts: 1,303
Likes: 0
Received 11 Likes on 11 Posts
You are correct, it is just a silencer.
 
  #7  
Old 04-09-2010
gibsondale's Avatar
Member
Thread Starter
Join Date: Mar 2010
Location: Culpeper VA
Posts: 351
Likes: 0
Received 0 Likes on 0 Posts
i will haha i was thinking a stetched out balloon and the clamp would do.

ohkay, do you know how the sound changes? is it a good sound or something weird like a whistle if you take it off?
 
  #8  
Old 04-09-2010
silverfox's Avatar
Member
Join Date: Jul 2008
Location: Taft, Ca
Posts: 1,040
Likes: 0
Received 1 Like on 1 Post
i have no clue on the sound ive never had another 2.3 to compare it to

i would get somthing better than a ballon to plug it up you may end up making ballon animals in your throttle body
 
  #9  
Old 04-09-2010
ScottG's Avatar
Member
Join Date: May 2004
Location: Lewiston, Maine
Posts: 4,926
Likes: 0
Received 0 Likes on 0 Posts
i took expandable rubber plugs and plugged it on my old 01. Its just there to limit intake noise
 
  #10  
Old 04-10-2010
shizzy's Avatar
Member
Join Date: Oct 2009
Location: Roseville, mn
Posts: 99
Likes: 0
Received 0 Likes on 0 Posts
its there to reduce resonance at a certain RPM.
 
  #11  
Old 04-10-2010
rangerboy101's Avatar
RF Veteran
iTrader: (5)
Join Date: Aug 2007
Location: Winchester, Va
Posts: 8,187
Likes: 0
Received 1 Like on 1 Post
It's for NOS
 
  #12  
Old 04-10-2010
gibsondale's Avatar
Member
Thread Starter
Join Date: Mar 2010
Location: Culpeper VA
Posts: 351
Likes: 0
Received 0 Likes on 0 Posts
i like his thinking haha
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tractorman
Drivetrain Tech
3
02-15-2010 09:33 PM
BigRed911
Suspension Tech
115
03-27-2007 10:48 AM
crooked02edge
Interior Semi-Tech
18
12-08-2006 04:08 PM
FMD
Interior Semi-Tech
10
12-06-2006 09:13 AM



Quick Reply: What purpose does this serve?



All times are GMT -6. The time now is 06:23 PM.