Front clip conversions?
#1
Front clip conversions?
I looked back pretty deep in here and didnt seem to find a thread about converting front clips. If im just missing one feel free to tell me. Im curious on my 93-97 how much is involved going to the 06 and up. I know the hood, fenders, header, lights, grille, core support need to be changed. Is the core support the only thing that has to be cut/welded or do like the inner fenders or something need to change too. Thanks!
#3
inner fenders will have to be modified just a hair, but if you can cut out a core support and weld a new one in, the minor trimming won't be an issue. other than that, sounds like you have the right idea. probably a little wiring on the head lights, and you'll need to change the driver's side hood hinge as well. don't forget the header panel to mount all the lights/grill to as well.
#7
inner fenders will have to be modified just a hair, but if you can cut out a core support and weld a new one in, the minor trimming won't be an issue. other than that, sounds like you have the right idea. probably a little wiring on the head lights, and you'll need to change the driver's side hood hinge as well. don't forget the header panel to mount all the lights/grill to as well.
#10
Damn it didn't realize the pics were gone.....try this one
http://www.therangerstation.com/Maga...conversion.htm
http://www.therangerstation.com/Maga...conversion.htm
Thread
Thread Starter
Forum
Replies
Last Post
aftermarket
Exterior Semi-Tech
6
08-19-2006 01:54 PM