line of fire for a steppy
#7
Member
iTrader: (1)
Join Date: Nov 2007
Location: Santa Fe, TN
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
Just make sure to cut it and be careful with the LED strip. Then your gonna want a good waterproof silicone and seal the end really good. The last thing your gonna want is an LED bar with condensation. Let the silicone cure for 24 hrs before exposing to water or humid conditons or whatever the max wait time it. I'd rather make sure it's cured than have a messed up bar. I've made my own 46" steppy LED bar. You'll want to get the RED ONLY kind. This won't work with the RED and WHITE backup one.
There should be a thread on here about how to cut one into an LED Line of Fire bar. Reacon sells the one most commonly used. I think it's like $50 or so. That's a really good one.
There should be a thread on here about how to cut one into an LED Line of Fire bar. Reacon sells the one most commonly used. I think it's like $50 or so. That's a really good one.
#8
#9
Member
iTrader: (1)
Join Date: Nov 2007
Location: Santa Fe, TN
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
The stepside's you'll have to cut the std. 49" line of fire bar to 46". I don't think they make that size bar. I know Granite Guy who owns underdog-performance used to sell them. I'm not sure he sells them anymore. Basically he took the 49" line of fire bar and cut them down to the 46" and sold them.
#11
Plasmaglow makes a flexible one that is MADE to be cut to length.
http://www.plasmaglow.com/fire-ice-led-tailgate-bar/
Cheesy install video:
http://www.youtube.com/watch?v=p2_zQEQP5rA
She says it can be cut down to 49"...but trust me it can be cut down to like 12" if you want. I bought one to screw around with on my flareside...it can be cut down to whatever length you want as long as you go in groups of three LED's.
http://www.plasmaglow.com/fire-ice-led-tailgate-bar/
Cheesy install video:
http://www.youtube.com/watch?v=p2_zQEQP5rA
She says it can be cut down to 49"...but trust me it can be cut down to like 12" if you want. I bought one to screw around with on my flareside...it can be cut down to whatever length you want as long as you go in groups of three LED's.
Thread
Thread Starter
Forum
Replies
Last Post
WholesaleMN.com
General Ford Ranger Discussion
14
12-22-2004 05:29 PM