help with posible mootr swap.
#1
#3
#5
#6
Computer and harness from a 2.3 should work. Just get a manual one.
Once you get those parts it should be only few wires needing power and ground. Again EVTM will help with that.
A junkyard or ebay should be good places for these parts.
Link for manuals
http://www.helminc.com/helm/homepage...3D01&q=helminc
Once you get those parts it should be only few wires needing power and ground. Again EVTM will help with that.
A junkyard or ebay should be good places for these parts.
Link for manuals
http://www.helminc.com/helm/homepage...3D01&q=helminc
#21
Depending on what you get you may need a trans too. Your looking at a grand plus to do a swap.
Without the truck first its kinda hard to plan one and nail down cost and difficulty.
IMHO, look for a truck with a blown up 2.3. It will be a very straight forward swap. Mostly swap over wiring harness and fuel injection stuff. You might want to consider new accessories.
Without the truck first its kinda hard to plan one and nail down cost and difficulty.
IMHO, look for a truck with a blown up 2.3. It will be a very straight forward swap. Mostly swap over wiring harness and fuel injection stuff. You might want to consider new accessories.
#22
Thread
Thread Starter
Forum
Replies
Last Post
2001fordranger
Drivetrain Tech
6
03-05-2011 07:06 PM
FordX4Ranger
Meets, Greets, & Events
21
06-10-2009 01:10 AM