Instument Illumination problem
#1
Instument Illumination problem
Hey everybody, im new to the site. I have a 2002 Ranger 4x4 and a have a problem I hope somebody can help me with. The light in the cruise control buttons on the left side of the steering wheel quit working. How do you fix that? Also the switch to turn your headlights on doesnt illuminate anymore either. I dont remember if it ever did or not. lastly a light went out on the middle top of the speedometer at like the 65 mark. I hope you guys can help me out, thanks in advance for any help.
#3
Yes, your headlight switch should be lit day and night when the ignition and/or the lights are on.
Both the headlight bulb and the CC pod bulbs burn out regularly and the tiny bulbs are not available separately at the dealer. If you're good at soldering, here are LED mods to fix that problem:
http://www.cardomain.com/ride/296394/23
http://www.cardomain.com/ride/296394/12
http://generation-edge.info/topic.asp?TOPIC_ID=110
The cluster has six bulbs in the back and you must remove the cluster to replace them. The number is 194 or 194LL (longer life). This is a bit of a hassle, so it would be smart to replace all six at once with the 194LL's.
Both the headlight bulb and the CC pod bulbs burn out regularly and the tiny bulbs are not available separately at the dealer. If you're good at soldering, here are LED mods to fix that problem:
http://www.cardomain.com/ride/296394/23
http://www.cardomain.com/ride/296394/12
http://generation-edge.info/topic.asp?TOPIC_ID=110
The cluster has six bulbs in the back and you must remove the cluster to replace them. The number is 194 or 194LL (longer life). This is a bit of a hassle, so it would be smart to replace all six at once with the 194LL's.
#4
#6
guess what, now more lights went out on my dash! now 10-80 is not lit up. hopefully i can get around to tearing the dash apart this weekend. those little thinks irritate me. only 60,000 miles on it.
Fx4Rangerman or whoever knows:
Ive noticed that alot of people crank their torsion bars. What does that do and how do you do it??? sorry, I know more about ATV's than auto's.
Thanks for all of your help i really appreciate it!
Fx4Rangerman or whoever knows:
Ive noticed that alot of people crank their torsion bars. What does that do and how do you do it??? sorry, I know more about ATV's than auto's.
Thanks for all of your help i really appreciate it!
#7
RF Veteran
iTrader: (6)
Join Date: Aug 2004
Location: nova
Posts: 5,061
Likes: 0
Received 0 Likes
on
0 Posts
yea the lights go out quick... but ive replaced them so much it doesnt take long now..
as for the t-bars, ill get a how-to in a sec... but its very easy
edit.. http://www.therangerstation.com/tech...orsionBar.html
as for the t-bars, ill get a how-to in a sec... but its very easy
edit.. http://www.therangerstation.com/tech...orsionBar.html
#11
I posted links above on how to replace the CC and H/L switch bulbs with LEDs.
Here is an article on removing the cluster. It is not as good as it could be but it will get you started. There are pictures with the article available through the hyperlinks.
http://www.rangerpowersports.com/tech/?p=109
Here is an article on removing the cluster. It is not as good as it could be but it will get you started. There are pictures with the article available through the hyperlinks.
http://www.rangerpowersports.com/tech/?p=109
Last edited by V8 Level II; 03-04-2006 at 12:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
eBay / Craigslist Find: instument cluster CHEAP!!!-ca
04_xlt_4.0_4x4
OLD - Interior, Exterior, Electrical, & Misc.
2
03-24-2012 05:38 PM
mazda96
General Technical & Electrical
3
05-23-2011 12:47 AM
rangerman2010
DOHC - 2.3L Duratec / Mazda L Engines
2
03-25-2010 12:20 PM