Which MOOG parts do I need?
#1
Join Date: Jul 2009
Location: Sanford, NC
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
Which MOOG parts do I need?
I see on the RockAuto website they have a selection of different ball joints and UCA's for my 98 4x4 Ranger. I have the two piece RH UCA design and I was wondering if it could be replaced with the UCA that looks identical to the LH UCA (1 piece). As for the LBJ's, it says one size fits a certain inside diameter LCA and one size just says lower, front, "problem solver". So far I have these part numbers in my shopping cart: K8695T, K8710T, K8708T, and ES3461. I don't want to screw up my order as i've never ordered from them before. Any help is much appreciated!
#2
K8710T is for the original 2-piece passenger side UCA that was used on 98~2003.5 torsion bar Rangers. It replaces only the ball joint and carrier, not the complete control arm. Although there still may be some available in the parts pipeline, the 2-piece style arm has been discontinued by both Ford and MOOG and superceded to the 1-piece style replacement arm (MOOG #K80068).
Note that these numbers are for with Rangers with torsion bar suspension ONLY (98+ 4x4, 2000 Trailhead, 2001+ Edge).
DS one-piece UCA 98~2006:
(MOOG K8708T):
UCA w/greasable ball joint
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS one-piece UCA 2003 1/2~2006:
(MOOG K80068)
UCA w/greasable ball joint
Similar appearance to K8708T above but with slightly different ball joint offset.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS 2-piece style ball joint carrier only 98~2003 1/2
(MOOG K8710T) :
Carrier w/greasable ball joint
Note: this part is discontinued and may not be available. The entire 2-piece PS UCA assembly can be replaced by the 1-piece K80068.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lower ball joint only 98+
Greasable, fits DS and PS
(MOOG K8695T)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Outer tie rod ends
Greasable, fits DS and PS
(MOOG ES3461)
DS one-piece UCA 98~2006:
(MOOG K8708T):
UCA w/greasable ball joint
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS one-piece UCA 2003 1/2~2006:
(MOOG K80068)
UCA w/greasable ball joint
Similar appearance to K8708T above but with slightly different ball joint offset.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS 2-piece style ball joint carrier only 98~2003 1/2
(MOOG K8710T) :
Carrier w/greasable ball joint
Note: this part is discontinued and may not be available. The entire 2-piece PS UCA assembly can be replaced by the 1-piece K80068.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lower ball joint only 98+
Greasable, fits DS and PS
(MOOG K8695T)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Outer tie rod ends
Greasable, fits DS and PS
(MOOG ES3461)
#3
Join Date: Jul 2009
Location: Sanford, NC
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
#4
#5
#6
Join Date: Jul 2009
Location: Sanford, NC
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
I believe it does. Do I need the cam kit because of the switch from the 2 piece to the 1 piece UCA? If so, which kit do I need? When I did them on my other truck I never got an alignment cam kit and the camber/caster were perfect.
I am going to do be doing all the work myself plus the alignment. I need to have it done this week so i'm trying to get everything ordered correctly the first time. I'm also going to have fun replacing my steering rack on monday.
I am going to do be doing all the work myself plus the alignment. I need to have it done this week so i'm trying to get everything ordered correctly the first time. I'm also going to have fun replacing my steering rack on monday.
Thread
Thread Starter
Forum
Replies
Last Post
Seb_L
Suspension Tech
13
03-16-2010 08:50 AM
RedPowerRanger
General Technical & Electrical
3
01-28-2007 05:25 PM