2.3L & 2.5L I4 Tech General discussion of 2.3L and 2.5L I4 Ford Ranger engines.

03 Ford Ranger xlt clutch job

Thread Tools
 
Search this Thread
 
Old Dec 1, 2017
  #1  
poor boy's Avatar
Thread Starter
|
Member
Joined: Jul 2016
Posts: 19
Likes: 0
From: san antonio, tx
03 Ford Ranger xlt clutch job

My clutch needs to be replaced due to burning out and my fly wheel needs to be replaced.

I know I can't get an exact number, but what could I be looking at? Worst/ best case scenario...
 
Reply
Old Dec 1, 2017
  #2  
RonD's Avatar
RF Veteran
iTrader: (1)
Joined: Jan 2014
Posts: 30,635
Likes: 2,952
From: Vancouver, BC
Clutch disc just wears out, like brake pads or shoes do

Flywheels can usually be resurfaced, but if not then $100-$125
Clutch kit with new slave about $300-$350
LUK is a good brand

But really up to the shop/mechanic as to which brand they chose because they have to warranty it.

4 to 6 hours labor, depends on if it is a 4x4 or 2WD, 4x4 takes a little longer

You will have to look up local hourly rates since they vary across the US

In general it runs $600-$800USD
In Canada $900-$1,100

You should also have the Rear Main seal replaced, $15 part but it is behind the flywheel on the engine so hard to get to if old one starts to leak

Added costs could be new clutch Master, these usually last for 2 or 3 clutch changes but the hose can crack, $100
Exhaust parts, these get rusted out and pipes and/or fittings can break when removed, and parts need to be removed to get transmission back and out of the way, costs will vary
 

Last edited by RonD; Dec 1, 2017 at 10:56 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
420stackz
2.9L & 3.0L V6 Tech
3
Nov 19, 2015 11:23 PM
DBW1968
Drivetrain Tech
4
Dec 22, 2013 04:24 PM
pcollins
Drivetrain Tech
4
Apr 23, 2010 06:59 PM
IN2 FX4
Drivetrain Tech
6
Nov 23, 2009 02:10 PM
harlodude
Drivetrain Tech
8
Aug 12, 2008 10:54 PM




All times are GMT -6. The time now is 03:10 PM.