I'm having trouble finding a EGR tube for my 96 Mazda B3000 3.0 5 speed SE.
included are pics of mine, the ends where the lines go to the sensor are broke.
Thanks for any help!

 

Best bet for now is to remove the EGR tube, get a threaded plug for exhaust manifold to seal it, these plugs are cheap, no I don't know the size
Pull off the EGR Valve's vacuum hose and plug the hose, i.e. put a screw/bolt in that fits tight

CEL(check engine light) will come on once engine is warmed up, its probably already on now if DPFE sensor(two hoses) are unplugged
Listen for pinging/knocking on acceleration, try to minimize it by backing off the gas pedal
Its OK to drive this way

https://www.car-part.com/
This is a good site to search for local used parts, use your Zipcode
Search for Engine
Then 3.0l(on next page)
It will show you local places with 3.0l Rangers that you may be able to get EGR tube from, its not technically part of the engine so they should sell it separately, but they can be a bear to remove, which is why you should take yours off FIRST so you know what tools you will need

Take your old tube with you for comparison, 1995 and up should be the same but not sure, if you look up the part, even if its "out of stock", it should still tell you the Years/Models its fits