Mass Air Flow?
#1
Mass Air Flow?
Alright I have been wondering for awhile now if I should be looking into upgrading my mass air flow sensor now that I have my K&N Intake system, I see that these little fellas cost a bit of coin, so before I went out and spent some money on this I thought I should check with my fellow rangers, so is it worth it?
Any horse/torque gain?
Any better fuel mileage?
Which model/brand best preforms?
Any horse/torque gain?
Any better fuel mileage?
Which model/brand best preforms?
#2
#3
are you talking about the housing? or the sensor? because I havent heard of a larger MAF sensor.... but with my larger MAF housing it has increased top end some and in the mpg dpt. But you will need a tune for a bigger housing, if you dont the truck will start up fine and then choke down due to too much air being drawn through the intake. I got mine from Underdog, check out his website http://stuffforyourranger.com/store/
#5
The one from Ford Motor Company. I never heard anything good about aftermarket MAFS. From what i heard, they actually cost you power. I'm sure with a proper tune that it could be beneficial, but for you it wouldn't be worth it.
Don't do it.
Don't do it.
#8
#9
Thread
Thread Starter
Forum
Replies
Last Post
RangerRunner96
2.9L & 3.0L V6 Tech
5
08-29-2008 01:01 PM
pushdeck
General Technical & Electrical
10
03-18-2007 09:52 AM