so i know im going to sound dumb because of how basic it is but i changed my plugs and wires. pretty strait forward right..... i finished the job and started my truck and it doesnt idle right and backfires like crazy(im asuming its misfiring) so i went back checked my plugs to make sure they were in all the way checked wires to make sure they were fully locked on and it still wont go right i cheked everything i changed probobly a hundred times and i need my truck for work tmrw so can anyone help me???? btw i replaced my wires with thundervolt 8.2 if that has to do with anything

 

What plugs did you put in and did you gap them?

 

Make sure all the plug wires click into place. Also check the firing order at the coil. I have messed this up myself. It goes: 465 on the back and 123 in the front. Not sure exactly but make sure you didn't mix them up.

 

v power ngk's and i thought they came gapped to what they needed to be?

 

This happens all the time. Check five and six. The coil pack is in a different order from the cylinders themselves

 

damn i feel like an idiot thanks guys it was the order