Clutch and Brake Pedal Bushings
#1
Clutch and Brake Pedal Bushings
Hi there,
I am having friction and squeaky noise issues with my clutch pedal. I've narrowed it down to the clutch pedal bushings. I've dissembled the entire assembly, cleaned and lubricated the metal and plastic bushings with silicone lubricant.
It solves the problem temporarily but I am experiencing small amounts of play on one side - which lubrication can't fix. Now the issue I am facing is I am unable to find the bushings specific to my 08 Ranger.
Ford wants to sell me the entire assembly for $300 claiming that those bushings kits don't exist for my year of Ranger. I am finding the bushings online for older rangers, mustangs, broncos, F150's etc.
Here is a similar part that isn't (apparently) compatible with the Ranger: Dorman-74016
Blue arrows show where these bushings are located.
Does anyone know what would be compatible with the 08 Ranger? I've seen other posts where someone builds their own bushing using copper piping, etc. I'm not against that but.. I would prefer not!
Any advise would be appreciated.
Thank you!
I am having friction and squeaky noise issues with my clutch pedal. I've narrowed it down to the clutch pedal bushings. I've dissembled the entire assembly, cleaned and lubricated the metal and plastic bushings with silicone lubricant.
It solves the problem temporarily but I am experiencing small amounts of play on one side - which lubrication can't fix. Now the issue I am facing is I am unable to find the bushings specific to my 08 Ranger.
Ford wants to sell me the entire assembly for $300 claiming that those bushings kits don't exist for my year of Ranger. I am finding the bushings online for older rangers, mustangs, broncos, F150's etc.
Here is a similar part that isn't (apparently) compatible with the Ranger: Dorman-74016
Blue arrows show where these bushings are located.
Does anyone know what would be compatible with the 08 Ranger? I've seen other posts where someone builds their own bushing using copper piping, etc. I'm not against that but.. I would prefer not!
Any advise would be appreciated.
Thank you!
#2
RF Veteran
iTrader: (1)
Welcome to the forum
Not familiar with the 2008 diameters but those bushings should work
They can expand a little if diameter of shaft is larger, and you can cut them down a little if shaft is smaller
Only other difference may be the "washer/shoulder" thickness for side to side distance, but you should be able to add thin metal washers or "sand down" thickness of new bushings
Not familiar with the 2008 diameters but those bushings should work
They can expand a little if diameter of shaft is larger, and you can cut them down a little if shaft is smaller
Only other difference may be the "washer/shoulder" thickness for side to side distance, but you should be able to add thin metal washers or "sand down" thickness of new bushings
Thread
Thread Starter
Forum
Replies
Last Post