Hi,

I just got my Actron Scanner and put it on my truck. It showed the following codes:

P0452

P1132

P1152

Can anyone help me with ideas on what they mean? I would greatly appreciate any help!

Also, the I/M Readiness tests show lots of incomplete. Do I need to drive with the Scanner attached in order to get those read?

Thanks in advance!

 

Use the search button.
https://www.ranger-forums.com/showth...ighlight=p0452

 

You can also google the codes, they're the same for every car ever made.
Were are people getting these cheap scanners that don't even have a code database build in?
as for the I/M tests. was your truck running or just key on?

 

Thanks for the info! I/M Readiness - truck was running.

 

Okay, so these are the codes and their meaning... now does anyone have suggestions as to what I should do about them?
P0452 Evaporative Emission Control System Pressure Sensor Low Input
P1132 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Rich - Bank No. 1
P1152 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Rich - Bank No. 2

I just replaced the oxygen sensors in March.

 

possibility of ur evaporative emissions vapor management valve being stuck open electrically due to p0452. n the other 2 codes could be a reslut of the 1st one.

 

If the diaphram in the fuel pulse dampener is bad the vacuum line will suck fuel straight from the fuel rail into the intake.

 

Thanks for the replies! Can anyone tell me where to find the EGR pressure valve sensor? Specific location looking from the front of the truck would be soooo helpful! I have looked and looked!

 

The EGR valve is locates on the driver's side, follow your oil dipstick down. It's round and flat, it's also horizontal and there is a vacuum line attached to the top of it.