Newbie here with 302 swap questions
#1
Newbie here with 302 swap questions
I have parted out my 95 mustang gt, i still have the shortblock, trans, bellhousing and the rear end housing, what would it take to make this swap work into an older model ranger say a box style one....
i could use the ecu, the harness, and a bunch of other stuff i have left for the computer side right?
Imput is appreciated, i am seriously thinking of doing this.
Jason
i could use the ecu, the harness, and a bunch of other stuff i have left for the computer side right?
Imput is appreciated, i am seriously thinking of doing this.
Jason
#3
I am looking at two, one is a 94, and one is an 87. I have been kinda looking around on here and i haven't seen anyone who has finished the swap completely. Is there a thread with some pics of one completed, and such as that. Both trucks i am looking at are not running so i think i can have either pretty cheap
jason
jason
#4
There is a forums search function. I recommend searching www.rangerpowersports.com for more info. Since there's a lot of currently swapped engines there. Go to the "V8 section"
Aaron
Aaron
#9
No offense but the ranger station is a joke. Well to me atleast. Lots of misguided individual over there.
I have one and it is COMPLETE!
Personally i would go a carb'd setup mainly because wiring would be a nightmare.
Main things you will need asides motor and tranny is the following items.
1. Oil filter relocation kit.
2. new radiator I used a 3 row (v6 ho style i believe it was. universal fit)
3. Engine mounts from rangerpowersports .
4. Might have to modify your transmission crossmember. I did for a c4.
5. alot of wiring and all will be cut and unusued with a carb setup.
6. 302 ranger headers (same as engine mounts)
7. Lots of patience and time.
I have one and it is COMPLETE!
Personally i would go a carb'd setup mainly because wiring would be a nightmare.
Main things you will need asides motor and tranny is the following items.
1. Oil filter relocation kit.
2. new radiator I used a 3 row (v6 ho style i believe it was. universal fit)
3. Engine mounts from rangerpowersports .
4. Might have to modify your transmission crossmember. I did for a c4.
5. alot of wiring and all will be cut and unusued with a carb setup.
6. 302 ranger headers (same as engine mounts)
7. Lots of patience and time.
#10
Computer system
No offense but the ranger station is a joke. Well to me atleast. Lots of misguided individual over there.
I have one and it is COMPLETE!
Personally i would go a carb'd setup mainly because wiring would be a nightmare.
Main things you will need asides motor and tranny is the following items.
1. Oil filter relocation kit.
2. new radiator I used a 3 row (v6 ho style i believe it was. universal fit)
3. Engine mounts from rangerpowersports .
4. Might have to modify your transmission crossmember. I did for a c4.
5. alot of wiring and all will be cut and unusued with a carb setup.
6. 302 ranger headers (same as engine mounts)
7. Lots of patience and time.
I have one and it is COMPLETE!
Personally i would go a carb'd setup mainly because wiring would be a nightmare.
Main things you will need asides motor and tranny is the following items.
1. Oil filter relocation kit.
2. new radiator I used a 3 row (v6 ho style i believe it was. universal fit)
3. Engine mounts from rangerpowersports .
4. Might have to modify your transmission crossmember. I did for a c4.
5. alot of wiring and all will be cut and unusued with a carb setup.
6. 302 ranger headers (same as engine mounts)
7. Lots of patience and time.
#11
302 swap
I have parted out my 95 mustang gt, i still have the shortblock, trans, bellhousing and the rear end housing, what would it take to make this swap work into an older model ranger say a box style one....
i could use the ecu, the harness, and a bunch of other stuff i have left for the computer side right?
Imput is appreciated, i am seriously thinking of doing this.
Jason
i could use the ecu, the harness, and a bunch of other stuff i have left for the computer side right?
Imput is appreciated, i am seriously thinking of doing this.
Jason
302 swap
I have a 1998 Ranger XLT 4x4 with the 4.0. I have an older model Police interceptor that I want to put in. It will have a Whipple on it as well. What kind of wiring will I need to get it running ?
I have a 1998 Ranger XLT 4x4 with the 4.0. I have an older model Police interceptor that I want to put in. It will have a Whipple on it as well. What kind of wiring will I need to get it running ?
Thread
Thread Starter
Forum
Replies
Last Post
brentmc
4.0L OHV & SOHC V6 Tech
11
02-27-2014 10:42 AM