Installed the HU a few days ago all bypassed and everything and hooked up the sirius this morning its flippin sweet i still need to find out how to get the HU flush with the install kit but overall looks and sounds great

time to go snag some pics!!!!

 

sorry for the crap cellphone pics

 

Looks great!

 

nice install good job with the antenna too

 

is yours a full touch screen

 

for the most part but there are 6 buttons volume up/down, seek </>,mute, source off,mode which turns screen on and off and menu which is used to adjust the screen settings

 

i thought i read somewhere the entire screen wasnt touch like in the middle

 

how do you pop that cover off to get it in there

 

send me a case of that root beer they dont sell it here any more.

 

i love my 3200 amazing unit... i added Nav its nice!

 

Looks real good!

 

looks like a clean install. Just a question about the antenna...aren't you risking a leaky windshield having the rubber up like that?

 

Hey I'm putting a KW-NT50HDT in my truck -- The install kit I have really sucks, the front of the unit is set back about 1.5" -- No way I can see to make it any better, what kit are you using?

thanks

 

Holy crap old post,what cover are you talking about?

 

They have them at albertsons 10 for $10 if you really want some im sure we could figure something out

 

Dosnt leak a drop it dosnt go all the way though the windside just under the lip.It follows the rubber down the side to the fender then into the firewall.

 

I used a metra 95-5600 but if i had to do it again i would go with a metra 95-5817 i ended up dremeling the living **** out of my 95-5600 (after the pics above)to make it like the
95-5817.

 

AHh the 95-5817 is crap that's the one I have, My unit sits back about 1.5" from the front of the opening. I don't like it one bit and you can't slide it forward any more.

 

The only advice i can give you is to bust out the dremel.Look at where the unit is catching on the adapter and grind small amonts till it fits.Also is the adapter seating properly in the radio bezel?May need to dremel some more off there too.

 

i used this guy http://www.sonicelectronix.com/searc...30B+%2F+FD1330 works nice but like silverfox i had to dremel mine up too

 

thanks guys -- I have a FD1330 on order, should be here in a few days.

 

good luck with it