Dynamat Extreme - Ranger-Forums - The Ultimate Ford Ranger Resource


Audio & Video Tech General discussion of audio and video for the Ford Ranger.

Reply
 
LinkBack Thread Tools Search this Thread
  #1  
Old 01-10-2005
Member
Thread Starter
 
Join Date: Dec 2004
Location: Louisville, KY
Posts: 22
Dynamat Extreme

How much Dynamat Extreme is needed to silence door rattle in a supercab? Would the 10x10 inch speaker kit be enough for an above average system? It seems that if it wasn't enough they wouldn't sell it. I understand to soundproof the cab, which I'm not, you're looking at maximum coverage.
Reply With Quote
  #2  
Old 01-10-2005
Member
 
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
I've said it before and I'll say it again, Peel and Seal. Dynamat is a rip off.
Reply With Quote
  #3  
Old 01-10-2005
rngprerunner's Avatar
Member
 
Join Date: Jun 2004
Location: Long Beach CA
Posts: 3,453
Where can you buy Peel and Seal?
Reply With Quote
  #4  
Old 01-10-2005
FoMoCoFiddy's Avatar
Member
 
Join Date: May 2004
Location: Smackdownville Tx
Posts: 4,508
Home depot.
Reply With Quote
  #5  
Old 01-10-2005
Member
 
Join Date: May 2004
Location: McKinney, TX
Posts: 2,123
Leo, you gotta help me find this stuff because the Lowe's and Home Depot's in Plano and Mckinney think I'm a nut for asking for this stuff.
Reply With Quote
  #6  
Old 01-10-2005
Member
 
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
I've bought it at lowe's a bunch of times. You can find it on the web too I bet.
Reply With Quote
  #7  
Old 01-10-2005
FoMoCoFiddy's Avatar
Member
 
Join Date: May 2004
Location: Smackdownville Tx
Posts: 4,508
Michael, ill go back and look, i need some too now. I had to take the back panel off.. It rattled BAD!
Reply With Quote
  #8  
Old 01-10-2005
aftermarket's Avatar
Member
 
Join Date: Jul 2004
Location: ab, ab
Posts: 655
Yeah, let me know what its called and what section its in, I have a Home Depot in my neighborhood and I'll check it out once it you can get me that info.
Reply With Quote
  #9  
Old 01-10-2005
Skyjacker_44's Avatar
Member
 
Join Date: Jul 2004
Location: Hillsboro,Texas
Posts: 1,079
i also want some of this stuff but have no lowes or home depo any where near me
Reply With Quote
  #10  
Old 01-11-2005
Member
 
Join Date: May 2004
Location: McKinney, TX
Posts: 2,123
Does it come in a roll or a stack of squares? Any colors on the packaging I can look for? I've looked on the shelves and in the overstock, but still no luck. Oh well I'll keep checking.

Dave, I've found it online, just would rather not pay shipping, because it's probably more than local tax, at least because I want ALOT of it.

Figure about 150-200 sq. foot to adequately do the entire cab? I've got pennies that dance in my cupholders at times, so everything else rattles. Plus that annoying wind noise from the mirrors.
Reply With Quote
  #11  
Old 01-11-2005
ranger024x4's Avatar
RF Veteran
iTrader: (6)
 
Join Date: Aug 2004
Location: nova
Posts: 5,061
while yall are talkin aobut this stuff, im still tring to figure out how to take off the stupid door panals lol
Reply With Quote
  #12  
Old 01-11-2005
JeepBoy258's Avatar
Member
 
Join Date: Dec 2004
Location: Huntsville, Texas
Posts: 3
i used a ton of sheets and cut as needed to cover my doors, fllorboard, back wall, and ceiling...

i used dynamat extreme, but now wish i had used something less expensive...

-christian(trevelyn1015)

(too lazy to sign off my buddy's name...)

Last edited by JeepBoy258; 01-11-2005 at 04:37 AM.
Reply With Quote
  #13  
Old 01-11-2005
Diabolic's Avatar
Member
 
Join Date: Sep 2004
Location: Rising Sun, MD
Posts: 1,542
How much does peel and seal run at home depot or lowes?

And i thought most people only did behind the door panels. I never thought around the entire cab. Intresting...
Reply With Quote
  #14  
Old 01-11-2005
Member
Thread Starter
 
Join Date: Dec 2004
Location: Louisville, KY
Posts: 22
How much Dynamat Extreme is needed to silence door rattle in a supercab? Would the 10x10 inch speaker kit be enough for an above average system? It seems that if it wasn't enough they wouldn't sell it. I understand to soundproof the cab, which I'm not, you're looking at maximum coverage.
Reply With Quote
  #15  
Old 01-11-2005
Member
 
Join Date: May 2004
Location: McKinney, TX
Posts: 2,123
Dynamat is anywhere from 6-10 bucks a square foot.
Peel and seal is around 1 dollar a square foot.

Peen & Seal:
http://hotrodders.com/gallery/showga...8&ppuser=18645
http://www.abccatalog.com/store/view...uct=2579952312
Reply With Quote
  #16  
Old 01-11-2005
Member
 
Join Date: Nov 2004
Location: Danville, VA
Posts: 2,664
i work at lowes and i've never heard of it before....

i'll do some searching today at work though..
Reply With Quote
  #17  
Old 01-11-2005
Member
 
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
I have personally bought several rolls at Lowe's in the roofing section of the store. I believe it is 12 inches by 25 feet and costs around $13.
Reply With Quote
  #18  
Old 02-02-2005
Member
 
Join Date: Jun 2004
Location: Dallas, Texas
Posts: 61
B-Quiet Extreme

http://www.b-quiet.com/lightning.html B-Quiet Extreme @1.40 s/f. The competition guys use it. My .02.

Last edited by 03OxfordEdge; 02-02-2005 at 06:35 PM.
Reply With Quote
  #19  
Old 02-03-2005
Member
 
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
Quote:
Originally Posted by 03OxfordEdge
http://www.b-quiet.com/lightning.html B-Quiet Extreme @1.40 s/f. The competition guys use it. My .02.

What a rip off. $39? I can get the same thing at Lowe's for $13 or 50 cents a sq foot. And it comes in the same 1 foot size, just like the roofing material. How coincidental.
Reply With Quote
  #20  
Old 02-03-2005
V8 Level II's Avatar
RF Veteran
iTrader: (4)
 
Join Date: Nov 2004
Location: Michigan
Posts: 7,833
The current price at Lowe's is around a $1/sq ft for Peel n Seal. It's about $13 for a 6" by 25' roll.
Reply With Quote
  #21  
Old 02-03-2005
Trevelyn1015's Avatar
Still El Presidente...
 
Join Date: May 2004
Location: Texas
Posts: 4,900
i used dynamat extreme to cover my entire interior, and ended up spending over $300.00 in the end...(i think... it was like 2+ years ago)

it wasn't a waste, in my opinion, because i am happy with the results and there is no odor, like there is with regular dynamat...

some of the stuff at lowes and home depot is probably just as good. i just didn't know about it back then... i wish i hadn't spent what i had, but its over...

oh yeah, and i got it for like 10% above cost, cuz i had a buddy that worked at a sound shop... normally it would have been alot more..
Reply With Quote
  #22  
Old 02-03-2005
Member
 
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
Quote:
Originally Posted by rwenzing
The current price at Lowe's is around a $1/sq ft for Peel n Seal. It's about $13 for a 6" by 25' roll.
You're right, it was 6 inches.
Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
How much dynamat/deadner did you use? Gearhead61 General Ford Ranger Discussion 35 12-07-2012 03:37 AM
dynamat... how-to ?? TommyC Audio & Video Tech 24 03-11-2007 12:10 PM
Dynamat 98TexasRanger Interior Semi-Tech 4 03-09-2007 01:22 PM
Dynamat or what? SanityAside Audio & Video Tech 29 06-16-2006 12:19 PM
Best place to buy dynamat? SONICEDGE03 Interior Semi-Tech 10 03-12-2006 09:39 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 06:08 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.