4x4 problems- 99 Ranger
#1
4x4 problems- 99 Ranger
I used 4x4 a couple days ago & it seemed to work ok. Then we got a bunch of snow & I put it in & nothing.
99 Ranger w/auto-lock hubs, the dial-type sitch to engage it. The 4x4Hi & 4x4Low lights blink at the same time, but nothing engages. They'll blink periodically when I'm driving, but nothing else.
I checked the simplist sollution & looked at all the dash board fuses, but of course it's never that easy. Could it be a relay under the hood or something worse? Any ideas?
Thanks
99 Ranger w/auto-lock hubs, the dial-type sitch to engage it. The 4x4Hi & 4x4Low lights blink at the same time, but nothing engages. They'll blink periodically when I'm driving, but nothing else.
I checked the simplist sollution & looked at all the dash board fuses, but of course it's never that easy. Could it be a relay under the hood or something worse? Any ideas?
Thanks
#3
It's often not the motor itself, but a control system problem due to a broken end-stop bushing or dirty contacts in the encoder.
See this link: http://www.explorerforum.com/forums/...d.php?t=123542
It's got what you need to figure out your problem.
See this link: http://www.explorerforum.com/forums/...d.php?t=123542
It's got what you need to figure out your problem.
Thread
Thread Starter
Forum
Replies
Last Post
Deckwench
General Ford Ranger Discussion
3
04-12-2015 01:54 PM
JGod
General Ford Ranger Discussion
3
02-08-2014 06:35 AM
Router
2.9L & 3.0L V6 Tech
2
05-05-2013 09:03 PM
MDM
Drivetrain Tech
8
09-16-2008 10:19 AM