Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

Anyone that works in a dealership (service dept. perfered).....

Thread Tools
 
Search this Thread
 
Old Dec 4, 2007
  #1  
lifted97ranger's Avatar
Thread Starter
|
Member
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
Anyone that works in a dealership (service dept. perfered).....

What does the book/computer say is the chargeable time for replacing a clutch? Just curious as how long to expect to take when dropping the auto tranny/t-case, swapping out the flywheel, installing the clutch, and reinstalilng the manual tranny/t-case...
 
Reply
Old Dec 4, 2007
  #2  
turbo's Avatar
Member
iTrader: (2)
Joined: Aug 2007
Posts: 565
Likes: 1
From: Tallahassee, FL
I don't work at a dealership, but the last time I priced this service (to install the clutch I already bought for my '93 Escort), "the book" charge was 7.5 to 8.5 hours. That, I assume, includes the time/labor to remove and turn the flywheel -- so, if you have a new or already-turned flywheel, it should take less. In any case, the cheapest I could find around here to do the job was starting at $750 and going up from there! (since this would have eclipsed the value of the vehicle, with or without a new clutch installed, I never actually had this work performed)

It may be considerably less time on a Ranger (which is rear wheel drive) than on an Escort (which is front wheel drive), though... so, best option is to just call around a few places and ask for ballpark estimates.
 
Reply
Old Dec 4, 2007
  #3  
Lefty04LevelII's Avatar
Joined: Aug 2005
Posts: 1,447
Likes: 0
From: DFW
looking through stealership receipts.............edit soon

receipt doesn't list hours, but when I supplied my center force dual friction kit Ford charged $400 in labor and 111.22 in parts (6L5Z-7A508-AA cylinder assembly) for the install.
 
Reply
Old Dec 4, 2007
  #4  
lifted97ranger's Avatar
Thread Starter
|
Member
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
preciate it Brian......Escort is quite different though....i would touch an Escort tranny....


waiting for you to edit it Chris.....
 
Reply
Old Dec 4, 2007
  #5  
lifted97ranger's Avatar
Thread Starter
|
Member
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
about 4 hours.....if their labor rate was $85 an hour (which is what it is here)...
 
Reply
Old Dec 4, 2007
  #6  
04lvl2's Avatar
RF Veteran
Joined: Jun 2004
Posts: 5,600
Likes: 0
From: Palm Bay, FL
Labor Skill
Level Mfg.
Warranty Standard
Clutch Disc
Replace B 4.2 5.6 Notes
Includes: R&I Transmission.
NOTE
To R&R Flywheel, Add B 0.2 0.2 Notes
With Floor Carpet, Add B 0.7 0.8 Notes
To R&R Pilot Bearing, Add B 0.0 0.2 Notes
 
Reply
Old Dec 4, 2007
  #7  
lifted97ranger's Avatar
Thread Starter
|
Member
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
thanks Bill....you da man...
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rob99
General Ford Ranger Discussion
35
Jan 19, 2011 10:50 PM
leftofEDGE
Audio & Video Tech
2
Sep 20, 2008 10:01 AM
Bailey
General Ford Ranger Discussion
51
Jan 26, 2005 09:11 AM




All times are GMT -6. The time now is 02:38 PM.