Hi guys...I'm new here, so please be gentle. I searched the threads but can't find an answer to my question so here goes. I have a 93 ranger XLT ext. cab. 4.0 motor 4x4. It has the non hybrid Dana 35 TTB front diff. The front left axle bearing is pooched. I figure I may as well get a rebuild kit for it and was wondering if the ExCel XL-1060-1 Bearing Master Kit (DANA 35 1980-2006) would work for this application? Thanks for any help you can give me.

 

Welcome to the forum

Looks like it will work but never used it

Diagram here: https://therangerstation.com/tech_li...na_Ford_35.pdf

 

Thanks for the quick reply and your help. I guess I'll order it from Amazon and see what happens. My mechanic gave me an estimate of 4 to 5 hours. Oh well....cheers.

 

Always change the u-joints on these axles, and probably the ball joints if they are older, these are not expensive parts just hard to get at so.......................

 

For sure. Both axle shaft u joints. One is a little sloppy, may as well do them both. Everything else is good. Thanks again.