2007 Ranger,just changed clutch but car wont go into gear!!!
#1
2007 Ranger,just changed clutch but car wont go into gear!!!
Hey everybody, my friend and I just changed the clutch on my 2007 Ranger 2.3 After finally putting everything back together the car still won't go into gear. To put it into gear we have to turn off the engine put it into gear then turn the car back on..
Do we need to bleed the clutch fluid? The friend that I worked with has changed clutches on his Mustangs before with no problem, so we figured the Ranger wouldn't be too bad.. Any ideas or help would be greatly appreciated.
Do we need to bleed the clutch fluid? The friend that I worked with has changed clutches on his Mustangs before with no problem, so we figured the Ranger wouldn't be too bad.. Any ideas or help would be greatly appreciated.
Last edited by tt3000gt; 02-01-2012 at 05:10 AM.
Thread
Thread Starter
Forum
Replies
Last Post
marcum18
General Technical & Electrical
13
10-16-2017 11:52 AM
DJBaar
Audio & Video Tech
1
06-11-2012 06:54 AM
05edge
General Technical & Electrical
26
05-07-2008 07:39 PM
tylerdavenport
4.0L OHV & SOHC V6 Tech
10
05-05-2008 10:58 PM