rear disc brake conversion?
#26
Will this work with the 28 spline 8.8 axle?
This was posted as a link then no one discussed it, being the cheapest of the conversions I would sway this way, as well as it is made by ford racing.
#27
Ford Racing M-2300-G
That kit is made up of exactly the same production parts that were used on the Gen 2 (95~01) Explorers which had 31-spline 8.8's. Without modification, it will not bolt up to the 28-spline 7.5 or 8.8 axles because the flange patterns are different. It will bolt to the flanges on 31-spline 8.8's and 9".
Thread
Thread Starter
Forum
Replies
Last Post
Dangerranger01
Engine & Drivetrain
177
03-26-2022 05:04 PM
Goodysgotacuda
OLD - Engine & Drivetrain
3
05-17-2009 12:57 AM
V8 Level II
General Technical & Electrical
38
09-11-2007 08:01 PM