First i am needing to find out what is the factory rear-end gearing in these trucks, its a single cab, 3.0L. I am wanting to change the gearing out to possibly run 35's in the near future, I am currently running 32's, so i would like to have a gear that will work with both 32's and 35's, just incase it takes a little bit to get the 35's.

 

Read the axle code from the driver door certification label and then decode it:

http://www.rangerpowersports.com/tech/?p=76

 

32's to 35's is a pretty big jump so it will be hard to find gearing that will work well for both. if you know you will have 35's in the near future just wait till you get them then regear. for 35's you will probably want 4.88's or 5.13's

 

I got under the truck and found out i have 4:10's and 8.8" rear end. Is that ok for 32's?