I split the case on my new manual transfercase that will not work. I looked at it and im not able to tell if it is bad. What should I look for? The chain looks like it is good, just a little bit loose. I put the transfercase in my truck and my truck just wouldnt move. What could be the problem. I just want to make sure that the transfercase is bad before i go and spend 150 on another one.

 

take some pictures and post them up


did you have it in gear when you were trying to get your truck to move or was the tcase in neutral

 

That's alot of work for nothing. Like Downey said was it in gear? I know my linkage is all kinds of worn and take some finagling to get it into the gears I want.

 

^^ same thing with mine. did you have to adjust the "gate plate" (you know what i mean?) mine wouldnt go into the gears right till i did that.

 

well I put it back together and found out that it was a problem with my linkage. Now I cant get it into 2wd though. Going to go and pull some new linkage tomorrow and ill let you guys know if it gets fixed. Thanks for the help though

 

take a picture of your linkage for me. i had the same problem till i adjusted it.

 

Ya the linkage is a ***** to get right. If you can't get it in 2wd just go underneath and move the arm yourself till you get new improved ****ty linkage.

 

haha yea i had mine on the lift 3 times are work adjusting mine.

 

Put the new linkage in today and works perfect. Thanks for your help guys.