2009 Mirrors on my 1996 Ranger
#1
#4
Yeah I got them off here last week for $60........pretty easy to mod them....Unscrew the two bottom lugs that go thru the door....you shave the nubs down smooth with the Mirror
(you will know what I mean when you see them) and reinsert the lugs and they fit flush...otherwise they stick out about a 1/4" along the bottom.
(you will know what I mean when you see them) and reinsert the lugs and they fit flush...otherwise they stick out about a 1/4" along the bottom.
#5
Yeah I got them off here last week for $60........pretty easy to mod them....Unscrew the two bottom lugs that go thru the door....you shave the nubs down smooth with the Mirror
(you will know what I mean when you see them) and reinsert the lugs and they fit flush...otherwise they stick out about a 1/4" along the bottom.
(you will know what I mean when you see them) and reinsert the lugs and they fit flush...otherwise they stick out about a 1/4" along the bottom.
#9
#11
Mine were manual so I just cut the wires....I know the plug in is not the same though and you will need to add about 8" of wire and just splice them all together.....so it appeared. because on the new Mirrors the plug harness comes out of the door and plugs into the Mirror.... unlike the 98 Ranger where the Mirror has the wire coming out if it 8 or so inches and plugs into the harness in the door.
#13
Thread
Thread Starter
Forum
Replies
Last Post
RoadrunnerII
Miscellaneous Items
0
04-22-2013 02:14 PM
Rentz
OLD - Interior, Exterior, Electrical, & Misc.
2
04-25-2011 09:06 AM
FMD
General Ford Ranger Discussion
16
03-31-2011 12:02 PM
yellow_tremor_03
Exterior Semi-Tech
2
02-01-2011 08:42 AM