99 to 01 conversion
99 to 01 conversion
what do i need to convert my 99 front in to a 01 front end .......i know the whole headerpanel and lights and grill and all that....but will i need fenders and a hood?
fenders are the same i believe. Hood can be the same. Get the "powerdome hood" that is straight across. The higher up years the hood is shaped slightly diff, i dont know exactly how to explain it but someone will provide pics.
Aaron
Aaron
i know its on another site, but heres a good write up on the swap
shows exactly the minimum required to swap
http://www.rangerpowersports.com/tech/?p=94
shows exactly the minimum required to swap
http://www.rangerpowersports.com/tech/?p=94
Check this out.......VERY nice idea imo.
http://cgi.ebay.com/ebaymotors/2001-...QQcmdZViewItem
Fairly nicely priced too. Depends on what grille you want, the 2wd XL grille (like in the auction) or an EDGE or XLT 4x4. I believe the auction includes EVERYTHING you need.
Good luck w/ what ever you do.
http://cgi.ebay.com/ebaymotors/2001-...QQcmdZViewItem
Fairly nicely priced too. Depends on what grille you want, the 2wd XL grille (like in the auction) or an EDGE or XLT 4x4. I believe the auction includes EVERYTHING you need.
Good luck w/ what ever you do.
Originally Posted by TXranger4x4
any 1 know where to get amazon green paint...in a can or not does not matter just need the paint
Originally Posted by 4X2XLT
F***ing nowhere.... the only thing i can find is the little pen... youd have to go to ford and have them make a batch for you and it wont be cheap...
Originally Posted by Hefavitzen
Can you fit a 98 - 2004 header (front headlight / grill thingy) on a 97????
Heck yes you can!
And by the way.
94-97 = a generation
98-00 = a generation
01-03 = a generation
and then 04+ is a generation, maybe there's 06 or 07 bein diff.
Most people want the 01-03 swap.
AND yes, you could do this swap to make an old ranger look as if it was built in the 2000s! Hmm, I feel as if im missing something though..
Aaron
Not w/out more parts you'll need to get the 98+ fenders, header panel, lights, and for the 04 front end, the power dome hood for sure. I think you'll need to get the newer style bumper as well because the 93-97 bumper is just relatively flat on top and the 98+ bumpers have somewhat of a curve to accomodate the grille.
Originally Posted by bwester04
Not w/out more parts you'll need to get the 98+ fenders, header panel, lights, and for the 04 front end, the power dome hood for sure. I think you'll need to get the newer style bumper as well because the 93-97 bumper is just relatively flat on top and the 98+ bumpers have somewhat of a curve to accomodate the grille.
anyways the older bumpers would look like ****.
Yah I think the fenders is what i was forgetting.
Aaron
Thread
Thread Starter
Forum
Replies
Last Post
aford89
Wheels & Tires Semi-Tech
17
Mar 29, 2009 01:09 AM
PickupMan92
General Ford Ranger Discussion
1
Aug 5, 2004 02:27 PM





