ok so i bought new fogs for my truck that was not equipt. with them from the factory. i guess ill explain with pics sorry if its a lil confusing and thanks again in advance...

i took the front cover off to expose the hole for the fogs
with it on:

with it off:

this is whith the fog in it but it just doesnt look rite

from the back you can see there is no way to attach the light

so i was thinking that i need to cut the cover cuz there are little studs that hold on the cover with 7/16 nuts (cant really see the studs in the pic but they are attached to the cover where the somewhat clean spot is):

 

You cut the light out with the honey comb part

 

so what use like a dremel or roto zip or something...

 

yeah thats what i did

 

well i guess thats what ill have to do

 

you can buy the honey comb inserts for the foglights