Ok.. I have had alot of PM's on how I made my bull bar work with my body lift. Now some of you may say the way I did it is crappy, cheap, and not very strong, blah blah blah, these bull bars even with the factory brackets aren't worth a crap. I just wanted mine to mount up, and work/look good with my body lift.

I was able to find a peice of steel that had a 90 degree curve in it and I cut off the part that curved on the factory bracket (where I cut it of is circled in WHITE in the first pic). I then drilled holes and bolted this steel to the factory bracket 3 inches above where the other bracket was curved.

This works fine, as I have actually been pulled out of a hole where I was stuck with a tow rope rapped around the bracket, HOWEVER, I do not recommend it! On to some pics. Some of the pictures are inverted, meaning they are taken from different angles from up under the truck. Enjoy!

 

looks simple


and sometimes, simple works best!