2002 xlt manual wimdow crank
Do you have a set of Torx Bits ?
Try them one at a time until one fit the best.
Sorry I had to do it !
Torx Bits are a good thing to have in the tool box so it will pay off to buy a DECENT set.
China made or cheap too, especially Torx Bits will break almost as soon as you put them in the Bolt Head.
I tried the ones that have the bit that slide in and out... JUNK, I got a set of Craftsman's from a Sear's sell-off and they have worked great not one breakage.
I even use the large one on the bed bolts with one breaking ot stripping out.
Go buy a good set and you won't have to ask about Torx Bit sizes again !
Try them one at a time until one fit the best.
Sorry I had to do it !
Torx Bits are a good thing to have in the tool box so it will pay off to buy a DECENT set.
China made or cheap too, especially Torx Bits will break almost as soon as you put them in the Bolt Head.
I tried the ones that have the bit that slide in and out... JUNK, I got a set of Craftsman's from a Sear's sell-off and they have worked great not one breakage.
I even use the large one on the bed bolts with one breaking ot stripping out.
Go buy a good set and you won't have to ask about Torx Bit sizes again !
Thread Starter
|
Member
Joined: Oct 2021
Posts: 69
Likes: 5
From: Wichita
T20. the screw is set so deep and the opening narfow enough that my torx ratchets cant get in there. I finally got it done though.I guess I need to find a set thats more like a screwdriver than a ratchet to get into narrower spaces.
Thread
Thread Starter
Forum
Replies
Last Post
Want to Buy: manual transmission for 2002 3.0 - SC
impact1223
OLD - Engine & Drivetrain
0
Jun 19, 2013 06:05 PM
