anyone know how to fiberglass stuff?
#1
#5
Make a female mold for each shape you need. Then you do a lay-up with the glass and resin. When the part(s) are done, trim to fit, assemble, and glass them together into an assembly.
To make the female mold, it's typical to make a male sample part (prototype) from wood, or plaster, or clay or whatever. Then you make the female tool from the sample part.
To make the female mold, it's typical to make a male sample part (prototype) from wood, or plaster, or clay or whatever. Then you make the female tool from the sample part.
Last edited by AeroDoc; 11-17-2006 at 06:55 PM.
#6
Try these links, although most are mainly about custom audio boxes, the same can be applied to a custom console for any purpose:
http://www.garbled.net/tim/fiberglass.html
http://www.caraudiohelp.com/how_to_f...fiberglass.htm
http://www.ajquick.com/cars/tutorials/fiberglass.php
http://www.garbled.net/tim/fiberglass.html
http://www.caraudiohelp.com/how_to_f...fiberglass.htm
http://www.ajquick.com/cars/tutorials/fiberglass.php
Thread
Thread Starter
Forum
Replies
Last Post
Fx4wannabe01
General Ford Discussion
16
08-31-2010 08:52 AM
mustangsvo85
Wheels & Tires Semi-Tech
20
04-13-2007 08:34 PM