General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.

Battery light on

Thread Tools
 
Search this Thread
 
Old Dec 6, 2020
  #1  
Billy Wall's Avatar
Thread Starter
|
Member
Joined: Nov 2020
Posts: 2
Likes: 0
From: Brazoria
Battery light on

Why is my Battery light on on a good battery?
 
Reply
Old Dec 6, 2020
  #2  
RonD's Avatar
RF Veteran
iTrader: (1)
Joined: Jan 2014
Posts: 30,635
Likes: 2,952
From: Vancouver, BC
Welcome to the forum

Battery light means the alternator is not charging the battery when engine is running, so battery will drain and engine will stall and not restart because battery is dead
And just a heads up, this can ruin a good battery, car batteries are not made to be fully drained

Could be a blown fuse or alternator has failed, what YEAR Ranger????

You can test the charging system easily with a volt meter, but need the YEAR of the Ranger to tell you what to test
 
Reply
Old Dec 6, 2020
  #3  
Billy Wall's Avatar
Thread Starter
|
Member
Joined: Nov 2020
Posts: 2
Likes: 0
From: Brazoria
Originally Posted by RonD
Welcome to the forum

Battery light means the alternator is not charging the battery when engine is running, so battery will drain and engine will stall and not restart because battery is dead
And just a heads up, this can ruin a good battery, car batteries are not made to be fully drained

Could be a blown fuse or alternator has failed, what YEAR Ranger????

You can test the charging system easily with a volt meter, but need the YEAR of the Ranger to tell you what to test
2004
 
Reply
Old Dec 6, 2020
  #4  
RonD's Avatar
RF Veteran
iTrader: (1)
Joined: Jan 2014
Posts: 30,635
Likes: 2,952
From: Vancouver, BC
2004 Ranger uses Fusible links instead of fuses which is actually better since they are less likely to "blow"

Get volt meter out and set it for DC volts
Key OFF
Test battery volts for base line, lets say battery is 12.4volts

On the back of the alternator will be the "B+" terminal, a stud/nut terminal, should have a black/orange stripe wire on it, leave wire connected
Put Volt meters black probe on alternator Metal Case(this is the Ground, battery negative), you will do this for all tests
Put red probe on B+ terminal
Should see Battery Voltage exactly, 12.4v in this example
If no volts then fusible link IS blown/bad

Now unplug the 3 wire connector on alternator, 2 wire if 4cyl engine
Test Yellow/white wire should see Battery Voltage
If not a fusible link is blown/bad

Test Green/red wire, should be 0volt
Turn on the key, engine off
Re-test green wire, should now be battery voltage, .1 or .2 less is OK

If all wires test as OK, then plug back in and start engine
Retest battery voltage, should be 14.2-14.8volts now, alternator is working
If still Battery voltage, or less, then alternator is bad, FOR SURE

 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dailydriver
General Technical & Electrical
8
Sep 23, 2010 04:36 PM
davidw
General Ford Ranger Discussion
12
Apr 17, 2009 07:48 AM
NVR2FST
General Technical & Electrical
5
Jan 4, 2008 08:11 AM
redranger04g
General Technical & Electrical
15
Dec 9, 2007 12:20 PM
puma768
General Technical & Electrical
10
Jun 16, 2007 03:09 PM




All times are GMT -6. The time now is 07:12 PM.