Front end question
#1
Front end question
Ok so my front end is all kinds of messed up. I know I have negative camber. It squeaks out of it's mind every time I compresses or decompresses and my alignment is off.
Ok, so where do i start with trying to fix this. I looked under the truck and found to camber bolts on the passenger side. Lower control arm only. I've heard my bushings and ball joints need to be replaced due to the squeaks. For the joints, what do I need? What all is there? I found online that for the uppers I have to buy new arms and for the lowers I can just replace the joint. for the lower is there more then just the ball joint? Would this help my camber or wold I need to add more camber bolts? I know at the end of all of this I need to get an alignment.
Thanks for your help and inputs.
Ok, so where do i start with trying to fix this. I looked under the truck and found to camber bolts on the passenger side. Lower control arm only. I've heard my bushings and ball joints need to be replaced due to the squeaks. For the joints, what do I need? What all is there? I found online that for the uppers I have to buy new arms and for the lowers I can just replace the joint. for the lower is there more then just the ball joint? Would this help my camber or wold I need to add more camber bolts? I know at the end of all of this I need to get an alignment.
Thanks for your help and inputs.
#2
Thread
Thread Starter
Forum
Replies
Last Post
01_Camaro_SS
Exterior Semi-Tech
7
12-20-2016 05:00 PM
red56rod
Solid Axle Swaps
7
04-02-2012 01:00 PM