Ok i just got my new 31x10.5's
Just ordered 15x7 5 on 4.5 with 4.5 backspaceing did i order the right back spaceing? for my truck not haveing anything but a 1 inch soil spacer on it... i drive an 02 XLT 2wd please hurry and let me know so i can srop the order if it's wrong

 

yes that would be very close to the stock wheel size...

but you might want a little less backspaceing so they stick out a little more, or if you get a spindle lift tho

 

they make a wheel spacer right? if need be i'll put wheel spacers up front to make them stick out a little more.... and whats the stock back spaceing?

 

Seems crazy to use a spacer when you can order the correct size to begin with.

 

already ordered them lol i was told tyhat any other back spaceing bwesides 4.50 wouldn't work on a 2wd ranger

 

djayenos
it's a 2wd so this is mostly for the off road look... however i do plan on off roading it alittle bit. but most of the time you only go to 15x8 when you step up to 33's " or i do" i had 33's on my jeep and ran 15x8's
but anyway....should this set up i ordered work?

 

Go with a 15x8 5x4.5bolt and a 3 1/4 backspacing thats the look your going for

 

does any body have any pictures of a 31 on a stock Xlt with 4.5 back spaceing.......Becuase i'v already ordered the tire becuase the guys at 4wp said thats what i needed

 

I have a 4cyl 5speed ranger 2x4 look at what i just posted

 

i saw it o well..... i'll see how they fit when they get here 4 wheel parts is only in plano i can make it there in under 45 min so i'll just take them back if i have to

 

ok called 4 wheel parts again and they said call back monday when every body was there for the internet servise so will 3.75 back spaceing fit or will it not i ned a definet answer so i don't screw up this time

 

Beleive me you will want the offset that i wrote, the 4.5 will suck it in to much and if you want to put a different lift on it wont work.

 

the 375 wil work. i have 3.6 on my wheels
and they scrud some but of coures im running 12.5 on an 8in wheel

 

k good i just got off the phone with 4 wheel parts and changed the order so i got a set of 15x7's 5 on 4.5 w/3.75 backspaceing

 

cool.........

 

Yeah thats the best backspacing you can have cause if you go much different from the factory you start risking serious damage to the wheel bearings. Thats one reason why on a Ranger 90% of wheel places will tell you to get a 15X8 instead of a 15X10 cause if you stick them to far out you have to repack the bearings every few thousand miles or else you will eat them away...