Inflatable bed pool
#1
Join Date: Apr 2019
Location: Philadelphia, Pennsylvani
Posts: 8
Received 0 Likes
on
0 Posts
#2
RF Veteran
iTrader: (1)
"A pints a pound the world around"
8 pints in a gallon, so a gallon of water weights 8lbs
200 gallons of water would be 1,600lbs, 600lbs over Rangers 1/2 ton, bed/frame weight limit
300 gallons is 2,400lbs close to rear axles limit(2,750) and way over Rangers bed/frame limit
Yes, sturdy jack stands, 4 of them would be needed, to do what you want
Just FYI, Ranger 6ft bed is 52 cubic feet
There are 7.5 gallons of water in one cubic foot
So Ranger bed filled to the top would be 390 gallons, or 3,120 POUNDS, of water, "say good night Gracie"
8 pints in a gallon, so a gallon of water weights 8lbs
200 gallons of water would be 1,600lbs, 600lbs over Rangers 1/2 ton, bed/frame weight limit
300 gallons is 2,400lbs close to rear axles limit(2,750) and way over Rangers bed/frame limit
Yes, sturdy jack stands, 4 of them would be needed, to do what you want
Just FYI, Ranger 6ft bed is 52 cubic feet
There are 7.5 gallons of water in one cubic foot
So Ranger bed filled to the top would be 390 gallons, or 3,120 POUNDS, of water, "say good night Gracie"
The following users liked this post:
95rangerphilly (06-21-2021)
Thread
Thread Starter
Forum
Replies
Last Post