Hey Y'all,

Joining this forum to hopefully get a resolution to an issue that makes me hate my recent purchase. 3 Weeks ago i purchased a 1995 B3000 5-Speed Manual. It has 4X4 and was converted to Manual Hubs by the previous owner. Upon time of purchase the 4X4 Worked perfect and operated as it should, drove the truck home used the 4X4 a few times here and there and now it will not work. The 4WH and 4WL Lights blink 6 Times every minute or so, and it drives me crazy. One thing i have noticed since it has stopped working is that when the truck sits for a while the system must reset and you can hear the Selinods Click over and over again before quitting and then the blinking comes back, this can be replicated by also disconnecting the battery. Recently I have replaced the below to try and remedy the issue and also fix up the truck. Any and all help would be greatly appreciated as I bought this truck to Tow and Off Road with so 4X4 is an absolute need.

New Parts:

1. Transmission Speed Sensor
2. Carrier Bearing
3. Transfer Case Shift Motor
4. Cam Shaft Synchronizer Sensor and Shaft

I have read all of the forums related to this issue and cannot pin point the issue from them, I do not think this year can be scanned due to hooking it up myself to a Snap On Scanner and not getting anything related to 4X4 System Faults. Other than this the truck is great and running strong. Leaking a little for sure (Exhaust and Oil) but shes as straight as they come for the frame so I am very happy about that.

Please let me know what you all think I should check/ replace next.