30,000 Mile Service?
#1
Okay I am trying to figure out some stuff I need to check or get checked. My truck has just rolled to 30,000. The only things I have changed/checked/replaced are:
- Fuel system cleaner (every 3'000 miles)
- Oil change (every 3'000 miles)
- Replaced factory belt with Dayco Poly Cog Belt
- Replaced faulty power steering pulley
- Tires rotated regularly
That's it. I am going to be getting an alignment soon so that will not be needed. Is there anything that I need to replace/check/change at 30,000? Thanks!
- Fuel system cleaner (every 3'000 miles)
- Oil change (every 3'000 miles)
- Replaced factory belt with Dayco Poly Cog Belt
- Replaced faulty power steering pulley
- Tires rotated regularly
That's it. I am going to be getting an alignment soon so that will not be needed. Is there anything that I need to replace/check/change at 30,000? Thanks!
#2
According to Ford, the 30k mile service includes:
*Change engine oil and replace oil filter
*Inspect brake pads/shoes/rotors/drums, brake lines and hoses, and parking brake system
*Inspect engine cooling system and hoses
*Perform multi-point inspection
*Rotate tires for optimal tire life
*Inspect complete exhaust system and heat shields
*Inspect wheel ends for end play and noise
*Replace engine air filter
*Inspect and lubricate steering linkage, ball joints, suspension and, if equipped, half shafts drive shaft and u-joints
*Replace fuel filter
*Change engine oil and replace oil filter
*Inspect brake pads/shoes/rotors/drums, brake lines and hoses, and parking brake system
*Inspect engine cooling system and hoses
*Perform multi-point inspection
*Rotate tires for optimal tire life
*Inspect complete exhaust system and heat shields
*Inspect wheel ends for end play and noise
*Replace engine air filter
*Inspect and lubricate steering linkage, ball joints, suspension and, if equipped, half shafts drive shaft and u-joints
*Replace fuel filter
#4
Thread
Thread Starter
Forum
Replies
Last Post
05RangerXLT
General Ford Ranger Discussion
19
11-19-2008 10:00 AM