Hi guys and gals,

I just replaced the heads on my 98 ranger and like an idiot - I didn't label the connectors as I removed them.

All was well until the last connector - I can not find.

On a 1998 RAnger 2.5l, on the same harness as the ac Compressor, there is one connector to some sensor I am guessing that I can't find the connection to.

The wires are red/yellow and black/white!

Dear god someone help me.

Thanks

 

and maybe snap a pic, it would seriously cure this OCD fit I'm having.

P.S. The truck starts and runs but I'm not sure if that connector is going to F things up!

Thanks fellas

 

Have 1996, 1997 and 1999 wiring diagrams can't see a Red/Yellow wire used in engine bay
Black/white is a Ground wire

 

Thanks I looked on clymers wiring diagram and couldn't find it either. But last night, as I was digging back into the motor because I now have an oil leak coming from somewhere, my girlfriend asked what the refrigerant port was and as I was explaining, found the connection was on the that pipe!

Now for that oil leak!

Thanks for the reply!