Automatic/Manual conversion? - Ranger-Forums - The Ultimate Ford Ranger Resource


General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Reply
 
LinkBack Thread Tools Search this Thread
  #1  
Old 03-05-2007
b3kbruiser's Avatar
Member
Thread Starter
 
Join Date: Nov 2006
Location: DFW Area, Tx
Posts: 713
Automatic/Manual conversion?

How hard would it be to do, and how much would it cost if I bought a rebuilt tranny?
Reply With Quote
  #2  
Old 03-05-2007
htvfd460stx's Avatar
Member
 
Join Date: Dec 2006
Location: Newton nj
Posts: 249
Going for a manual you will need the usual stuff like clutch and fly wheel master cylender and pedal: that stuff.
possible things to get are the trans x member, computer, and reverse switch.
prices though i dont know.
and most of it is bolts and nuts. the hardest part is unbolting and rebolting the transmission bell housings.
Reply With Quote
  #3  
Old 03-05-2007
lifted97ranger's Avatar
Member
 
Join Date: Nov 2005
Location: Charlestown, IN
Posts: 1
if you do it, get a truck with the same engine that has a manual tranny and then swap out the tranny, flywheel, wiring harness to the tranny, ECM, driveshaft(s), shifter linkage, clutch, clutch fluid holder and so forth....
Reply With Quote
  #4  
Old 03-05-2007
SouthernMudSlinger's Avatar
Member
 
Join Date: Aug 2006
Location: Demorest,Ga
Posts: 1,724
I think all of the holes for the manual tranny linkage and everthing are already there right? just plugged up?
Reply With Quote
  #5  
Old 03-05-2007
lifted97ranger's Avatar
Member
 
Join Date: Nov 2005
Location: Charlestown, IN
Posts: 1
they are....you will also have to pull your carpet back and swap the tranny tunnel cover so it has the holes for the manual shifter........then cut a hole in your carpet for the shifter to go through...
Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Automatic - Manual Conversion = Running Lean? ciscobird General Ford Ranger Discussion 0 04-10-2013 01:09 PM
Automatic to Manual Conversion theelcaminoman Drivetrain Tech 2 06-07-2011 04:17 PM
1994 ranger automatic to standard conversion ? curranjx01 Drivetrain Tech 3 07-14-2010 11:09 AM
3.0manual conversion to a automatic 2001fordranger General Ford Ranger Discussion 42 08-14-2009 07:50 PM
2004 Ranger Service Manual, Wiring Manual and Haynes Manual - NC 04blackedge Interior, Exterior, Electrical, & Misc. 1 05-07-2009 05:43 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 06:12 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.