General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Belt Squeeking??? Help!!

Thread Tools
 
Search this Thread
 
  #1  
Old 11-23-2005
jrsmith313's Avatar
Member
Thread Starter
Join Date: Oct 2005
Location: Ypsilanti, MI
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Belt Squeeking??? Help!!

I just had the water pump replaced on my 2001 3.0L Ranger. I also had them change the belt too. I never had any noise before, but now it's squeeking like crazy at idle. What would be causing this with a new belt? There is only 34k on the truck.

I took it back to the shop and they told me that they couldn't get it to squeek! Not to mention that they broke my hood release cable and then told me that it was like that when I brought it in! I can tell you that I'm never going back to that shop again.

Please help me if you can.
 
  #2  
Old 11-23-2005
n3elz's Avatar
RF Veteran
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
Cheapo belt maybe, and you should check to see that it's centered right over the pulleys (like, not one groove "off").

I've had two 3.0 Rangers that did this and I have two words on the squeaking issue: Goodyear Gatorback. The Goodyear Gatorback belt solved it on my truck and I will no longer even consider running anything less.
 
  #3  
Old 11-23-2005
jrsmith313's Avatar
Member
Thread Starter
Join Date: Oct 2005
Location: Ypsilanti, MI
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Ok, thanks...I'll check into one of those.
Has anyone replaced the hood release cable? Is it a very hard job?
 
  #4  
Old 11-23-2005
rangererv's Avatar
Member
Join Date: Mar 2005
Location: Dearborn Michigan
Posts: 4,376
Likes: 0
Received 1 Like on 1 Post
ya my belt was skueaking to.
i just put on a gatorback belt and its GONE..
its worth the extra money.
 
  #5  
Old 11-23-2005
instigator453's Avatar
Member
Join Date: Nov 2005
Location: Polk City,FL
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
use double d 40
 
  #6  
Old 11-23-2005
graniteguy's Avatar
Member
iTrader: (3)
Join Date: Jul 2005
Location: Texas
Posts: 3,221
Likes: 0
Received 1 Like on 1 Post
With me, adding lubricants made it worse shortly after applying it.
 
  #7  
Old 11-23-2005
67cobain94's Avatar
Member
Join Date: Jul 2005
Location: Vero Beach, Florida
Posts: 708
Likes: 0
Received 1 Like on 1 Post
Originally Posted by instigator453
use double d 40
Which will just make it 9 times worse. If you just had a water pump installed they probably spilled coolant on the belt and it's **** after that. If you're too broke to buy a new belt and you won't take off your hand in the fan take a wire brush and run it over both sides of the belt with the engine running for a couple seconds...
 
  #8  
Old 11-23-2005
rangererv's Avatar
Member
Join Date: Mar 2005
Location: Dearborn Michigan
Posts: 4,376
Likes: 0
Received 1 Like on 1 Post
the only thing that i have had work for my belt was belt dressing. and that make it worse for the 1st day then it finally set in and stoped the noise. But it came back yesterday so it didnt totally fix it. (3-4 months later)
And pam cooking spray is a temp. fix. It will stop the noise for a few hours

wd 40 doesnt work at all. It is a water based lube that just wears off. You need a oil based lube, but just buy a new gatorback belt.
 
  #9  
Old 11-23-2005
instigator453's Avatar
Member
Join Date: Nov 2005
Location: Polk City,FL
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
use 10-40w
 
  #10  
Old 11-23-2005
67cobain94's Avatar
Member
Join Date: Jul 2005
Location: Vero Beach, Florida
Posts: 708
Likes: 0
Received 1 Like on 1 Post
Originally Posted by instigator453
use 10-40w
You're either kidding or brutally retarded. I hope you're only kidding.
 
  #11  
Old 11-23-2005
instigator453's Avatar
Member
Join Date: Nov 2005
Location: Polk City,FL
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
j/k needs to just quite being cheap and go buy a new one
 
  #12  
Old 11-23-2005
n3elz's Avatar
RF Veteran
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
Hey, his name is "instigator" -- what did you expect?
 
  #13  
Old 11-23-2005
instigator453's Avatar
Member
Join Date: Nov 2005
Location: Polk City,FL
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
dont expect much from me i am just a dumb prepneck that cant spell or talk
 
  #14  
Old 11-23-2005
n3elz's Avatar
RF Veteran
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
"prepneck"? Hey that's a new one. Redneck I know, pencilneck I know -- but not prepneck. Learn something new everyday, even though I don't know what the heck you're talking about!
 
  #15  
Old 11-23-2005
instigator453's Avatar
Member
Join Date: Nov 2005
Location: Polk City,FL
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
will i wear my tommy's not wranglers fit jeans not tit and do everything that a redneck would do but hunt
 
  #16  
Old 11-23-2005
n3elz's Avatar
RF Veteran
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
Ha ha! I get it then! I'll remember that. Is that a term thats used or did you just make it up? Pretty cool either way.

Well, I'm semi-redneck south Jersey raised quasi suburban...uh...I forget where I was going with that...grew up on farms...but I work in a steel mill. I don't know what I am (though people suggest names all the time -- can't print some of them here though)...
 
  #17  
Old 11-23-2005
instigator453's Avatar
Member
Join Date: Nov 2005
Location: Polk City,FL
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
all my buddy keep asking me am i a prep or a redneck so i told them prepneck just to get laughs out of it but now i tell everybody that
 
  #18  
Old 11-25-2005
jrsmith313's Avatar
Member
Thread Starter
Join Date: Oct 2005
Location: Ypsilanti, MI
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Thanks for all the help...I ordered a new hood release cable, so hopefully I will be able to take care of it soon. It is driving me insaine!!
I'm still wondering how hard it will be to swap out the release cable.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MudSlanger
2.9L & 3.0L V6 Tech
50
04-01-2009 09:28 PM
Robot_
4.0L OHV & SOHC V6 Tech
14
08-27-2006 02:54 PM
HighRollerII
General Ford Ranger Discussion
11
05-26-2006 08:59 AM
05rangeredge
Suspension Tech
14
04-16-2006 03:59 PM
jtslmn720
2.9L & 3.0L V6 Tech
21
04-04-2006 05:06 AM



Quick Reply: Belt Squeeking??? Help!!



All times are GMT -6. The time now is 10:16 AM.